CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   small doubt with fluent (

iņigo February 28, 2011 04:40

small doubt with fluent
Hello. I am working in the simulation of a ductile iron cube submerged in a molten salt bath.

Obviously, the cube and the salt bath are at different temperatures, but I can't figure out how could I implement it; if I use the 'initialize' command, the two volumes are at the same temperature, and using the 'boundary conditions' command doesn't help either, because it only puts the wall at the requested temperature (as expected).

So, my question is: is there any way to impose two different temperatures to two volumes before starting the simulation?

Thanks in advance

Amir February 28, 2011 10:13

you can do that by patching method.

DiegoS February 28, 2011 12:36

I've made a little video for you:

I've patched using a register, but if the cells you want to patch are in a different volume zone, you can better use that (check the Patch window).


iņigo February 28, 2011 14:04

Thank you!that works wonders:D

All times are GMT -4. The time now is 13:52.