CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

**Help needed on plume simulation**

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 21, 2011, 16:16
Default **Help needed on plume simulation**
  #1
plk
New Member
 
Join Date: Nov 2010
Posts: 1
Rep Power: 0
plk is on a distinguished road
Here's a basic idea of what I'm trying to do: I am simulating an ocean environment using fluent were there are slightly warmer fluids intruding from the seafloor. Water temperature at the seafloor is 4 deg C. This creates a heat plume in the ocean water. I have a temperature gradient of the water calculated by a udf. Since density changes from surface to seafloor, I also have a udf to calculate density and sound speed from the temperature. Is this necessary to have these udf's for density and sound speed?

Also, pressure changes from surface to seafloor. One question I have is how in Fluent can I get this pressure gradient represented? I would think to apply it to the water face boundary condition as fixed values, but I dont see an option there for pressure.

I have tried running the simulation without the pressure conditions and I dont feel like I am getting a realistic result. The plume, which is originating from an inlet with a temperature of 9 deg C, rises all the way to the top of the model and then proceeds to destroy the temperature gradient that has been established.

Another question I have about this simulation is if you look at the picture attached, the plume is rising into water that is getting warmer as you go up. Is there a reason why the plume is not taking the heat from the surrounding water? What would make sense to me is that the plume would rise to a certain point then start to spread laterally. It wouldnt go all the way to the top of the model.

I am also wondering which type of boundary condition to use for the left and right sides of the model. I have tried symmetry, outflow, and pressure-outlet

Just fyi: the model is using a pressure based solver, using the energy equation, and k-epsilon with full buoyancy effects for the viscous model. Gravity is also turned on with a y value of -9.81

Any help would be greatly appreciated. I am not very familiar with how fluent works. I have just been thrown into it and am learning as I go. Thanks
Attached Images
File Type: jpg watertempprof.jpg (72.2 KB, 25 views)
plk is offline   Reply With Quote

Reply

Tags
boundary conditions, fluent, ocean, plume, temperature gradient

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pure plume: use different viscous models in different regions of a simulation alemenchaca FLUENT 0 June 18, 2009 16:26
spray plume Jay Siemens 0 July 25, 2008 23:26
Buoyant plume source Iona Evans CFX 0 February 27, 2008 08:29
LES of thermal plume Bobby Main CFD Forum 1 May 5, 2005 13:27
a dissertation in ETD needed very much LiQiang Main CFD Forum 0 March 11, 2005 04:09


All times are GMT -4. The time now is 11:40.