mesh rectangular box with 0.1mm diameter holes in gambit -- CFD Online Discussion Forums

April 23, 2011, 02:47	mesh rectangular box with 0.1mm diameter holes in gambit	#1
sohi New Member Sohi Join Date: Apr 2011 Posts: 1 Rep Power: 0	Dear all: I want to mesh a rectangular box with 0.1mm diameter holes at the bottom face. (The holes are the boundaries for velocity inlet) . But because of small diameter of the holes, the quality of meshes in the bottom face is not suitable (just 2 or 1 mesh for each hole). If i decrease the interval size of meshes, number of meshes increase illogical. Do you have any idea for mesh or design this box? Is it possible to divide the volume in 2 parts in mesh with specified condition at interval size and type?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
Not able to mesh a helix with boundary layer using gambit	rohitjvbibin	FLUENT	1	March 7, 2011 04:40
Not able to mesh a helix with boundary layer using gambit	rohitjvbibin	Main CFD Forum	0	March 5, 2011 11:28
Not able to mesh a helix with boundary layer using gambit	rohitjvbibin	ANSYS	0	March 5, 2011 11:27
Mesh Resolution in Gambit	Vidya Raja	FLUENT	2	January 18, 2006 23:35

All times are GMT -4. The time now is 12:38.