urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using)

balu@gold6 · May 19, 2011, 08:41

hi,
i am doing project on multiphase cfd models in gas -liquid packed bed reactor,
currently i am using VOF model to study the pressure drop and liquid holdup variation in packed bed- in 2D. i was generated mesh in Gambit by using (dimension: 0.25m length and Id-12.5mm & diameter of particle 2m in side bed (particles are in non-overlapping position). I was started Fluent simulation by using this mesh but i am not getting simulation runs......can anybody suggest...is there any udf needed for vof model & how to proceed in fluent by using VOF.is there any Tutorial of VOF model related to Packed bed reactor.......send any link r mail related matter......

urgent.urgent...please send any information .
My mail id: balu.gold6@gmail.com

alighaffari · May 19, 2011, 16:06

fluent 6.3 tutorial guide in chapter 16 explain the VOF model Thoroughly it will help you. if you haven’t this document I can send it you.

balu@gold6 · June 3, 2011, 03:25

thank u friend for u r suggestion
hi...
i have arisen new problem, i am using k-e turbulence model in Multiphase VOF model, i want to write udf for surface tension source(source term in momentum equation)...how to write udf for that term contained, surface tension coefficient, gradient of volume fraction of phase. i am using AIR-WATER LIQUID SYSTEM having spherical particles of 2mm diameter in 2D,dp in FLUENT SOFTWARE.

can anybody help me urgent............

i really thankful.............anybody

tringuyenttt · March 16, 2012, 11:21

Quote:

Originally Posted by alighaffari

fluent 6.3 tutorial guide in chapter 16 explain the VOF model Thoroughly it will help you. if you haven’t this document I can send it you.

Dear Guy,
In this tutorial guide for patching simple geometry. How about for complex geometry (such as simulation red blood cell, elliptic, membrane...) Please help me.
Thanks

Saba · July 26, 2012, 10:37

Quote:

Originally Posted by balu@gold6

hi,
i am doing project on multiphase cfd models in gas -liquid packed bed reactor,
currently i am using VOF model to study the pressure drop and liquid holdup variation in packed bed- in 2D. i was generated mesh in Gambit by using (dimension: 0.25m length and Id-12.5mm & diameter of particle 2m in side bed (particles are in non-overlapping position). I was started Fluent simulation by using this mesh but i am not getting simulation runs......can anybody suggest...is there any udf needed for vof model & how to proceed in fluent by using VOF.is there any Tutorial of VOF model related to Packed bed reactor.......send any link r mail related matter......

urgent.urgent...please send any information .
My mail id: balu.gold6@gmail.com

Hi guys ...I want to generate a trickle bed reactor mesh using gambit 2.4 with 3 mm particle beads inside, does any body have a tutorial to guide me ? i am working on hydrodynamics and want to simulate my column using CFD...do any one have this tutorial ? or any written steps? the dimensions are 12 cm couln diameter, 2.3 m height and the flow in downward.urgent.urgent...please send any information .my mail is ghenis@mst

May 19, 2011, 08:41	urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using)	#1
balu@gold6 New Member BALAJI .A Join Date: Nov 2010 Posts: 4 Rep Power: 15	hi, i am doing project on multiphase cfd models in gas -liquid packed bed reactor, currently i am using VOF model to study the pressure drop and liquid holdup variation in packed bed- in 2D. i was generated mesh in Gambit by using (dimension: 0.25m length and Id-12.5mm & diameter of particle 2m in side bed (particles are in non-overlapping position). I was started Fluent simulation by using this mesh but i am not getting simulation runs......can anybody suggest...is there any udf needed for vof model & how to proceed in fluent by using VOF.is there any Tutorial of VOF model related to Packed bed reactor.......send any link r mail related matter...... urgent.urgent...please send any information . My mail id: balu.gold6@gmail.com kalpesh likes this.

June 3, 2011, 03:25	urgent.........udf help	#3
balu@gold6 New Member BALAJI .A Join Date: Nov 2010 Posts: 4 Rep Power: 15	thank u friend for u r suggestion hi... i have arisen new problem, i am using k-e turbulence model in Multiphase VOF model, i want to write udf for surface tension source(source term in momentum equation)...how to write udf for that term contained, surface tension coefficient, gradient of volume fraction of phase. i am using AIR-WATER LIQUID SYSTEM having spherical particles of 2mm diameter in 2D,dp in FLUENT SOFTWARE. can anybody help me urgent............ i really thankful.............anybody

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Salary	CFD	Main CFD Forum	17	January 3, 2017 17:09
CFD Design...The CFD Future	John C. Chien	Main CFD Forum	20	November 19, 2015 23:40
MULTIPHASE - FREE SURFACE & MIXTURE MODEL	Aris	FLUENT	3	April 28, 2009 11:46
CFD for fans & blower housings	David Carroll	Main CFD Forum	8	August 24, 2000 17:25
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27

May 19, 2011, 16:06		#2
alighaffari Member alighaffari Join Date: May 2011 Posts: 31 Rep Power: 14	fluent 6.3 tutorial guide in chapter 16 explain the VOF model Thoroughly it will help you. if you haven’t this document I can send it you.