plotting

wisemo · June 26, 2011, 14:15

Hi

I have a surface that is rectangular and has holes in it, and has flow along its length. I want to plot the mean static pressure along it. Is that possible?

Any help would be greatly appreciated, thank you.

Mo

wisemo · June 27, 2011, 20:22

Please help...I'm desperate

tobino · June 27, 2011, 20:38

Hi,
Is your problem in 2D or 3D. If it is in 3D you need creating some plane at Surface/plane in Fluent then you can report it OK belong to you.

wisemo · June 27, 2011, 21:03

Tobino, my problem is a 3D problem. It is essentially flow through a rectangular x-sectional duct. 1 of the surfaces has bleed holes.

I want to plot the static pressure along the duct, along the surface that has the bleed holes. That is already defined as a surface, as it's defined as a wall BC.

tobino · June 29, 2011, 00:11

so, if you have got a surface you can be choice it at Report box and reporting belong your selection in box. I do not understand clearly your problem. please try again, good luck!

wisemo · June 29, 2011, 00:28

i've drawn a simple image to explain what i need. hopefully it'll be clear now. i just want to plot the average temperature along the surface i've drawn.

tobino · June 29, 2011, 01:00

Plot/XYplot/select your surface and chosen static pressure.

June 26, 2011, 14:15	plotting	#1
wisemo New Member Mohan Join Date: Mar 2011 Posts: 21 Rep Power: 15	Hi I have a surface that is rectangular and has holes in it, and has flow along its length. I want to plot the mean static pressure along it. Is that possible? Any help would be greatly appreciated, thank you. Mo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free surface flow settubg boundary conditions and plotting velocity profiles	prashanthreddyh	FLUENT	2	October 21, 2015 09:58
Contours of 2D plotting	therockyy	FLOW-3D	4	December 22, 2012 15:04
Graph plotting	Lam	FLUENT	2	September 25, 2003 07:02
Plotting "in-plane" in 3-D	Karl Kevala	FLUENT	0	September 6, 2001 17:47
Contour plotting	Mark Russell	Main CFD Forum	5	April 22, 2000 22:45

June 27, 2011, 20:22		#2
wisemo New Member Mohan Join Date: Mar 2011 Posts: 21 Rep Power: 15	Please help...I'm desperate

June 27, 2011, 20:38		#3
tobino Member Tobino Join Date: Jan 2011 Location: Osaka,Japan Posts: 33 Rep Power: 15	Hi, Is your problem in 2D or 3D. If it is in 3D you need creating some plane at Surface/plane in Fluent then you can report it OK belong to you.

June 27, 2011, 21:03		#4
wisemo New Member Mohan Join Date: Mar 2011 Posts: 21 Rep Power: 15	Tobino, my problem is a 3D problem. It is essentially flow through a rectangular x-sectional duct. 1 of the surfaces has bleed holes. I want to plot the static pressure along the duct, along the surface that has the bleed holes. That is already defined as a surface, as it's defined as a wall BC.

June 29, 2011, 00:11		#5
tobino Member Tobino Join Date: Jan 2011 Location: Osaka,Japan Posts: 33 Rep Power: 15	so, if you have got a surface you can be choice it at Report box and reporting belong your selection in box. I do not understand clearly your problem. please try again, good luck!

June 29, 2011, 00:28		#6
wisemo New Member Mohan Join Date: Mar 2011 Posts: 21 Rep Power: 15	i've drawn a simple image to explain what i need. hopefully it'll be clear now. i just want to plot the average temperature along the surface i've drawn.

June 29, 2011, 01:00		#7
tobino Member Tobino Join Date: Jan 2011 Location: Osaka,Japan Posts: 33 Rep Power: 15	Plot/XYplot/select your surface and chosen static pressure.