CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Can't see Particle Tracks!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 3, 2004, 04:08
Default Can't see Particle Tracks!
  #1
Lior
Guest
 
Posts: n/a
Hi,

I injected particles to a tube in my model, however, although in each iteration the computer tells it injects particles in the tube, none of them are shown in the particle tracks view, and also when i ask for a report, it says that none of the particles i injected are found in the tube! I defined the entrance boundary conditions as "reflect", to make sure that no particle is lost, but it didn't help. I scaled the Max. number of steps X Length Scale, to be as the length of my tube, as mentioned in Fluent help, but it didn't solve it. I tried various flow rates and various velocities for the particles, but none helped, and in all cases, although the particles were injected in, none were found to flow in the tube!!! This is so weird, yet i am sure there is some silly mistake or a parameter i must change...

I hope anyone can help me.... it's so frustrating, and i'm stuck with it.

Thank you!!!

  Reply With Quote

Old   June 4, 2004, 12:02
Default Re: Can't see Particle Tracks!
  #2
Diego
Guest
 
Posts: n/a
I had the same problem a few times. Once I confused with the injection point (I injected outside the problem domain). The other was when I was injecting in unsteady state, in this type of problems you have to postulate the injection start/stop time (in the injection defining panel). A its common that when you save the case and re-open it, Fluent can't find the particles in this case, try defining the injections as "file" (no matters wich file you use for them) click "OK" and then specify them again as they are (plain orifice atomizer/air blast atomizer/etc) Bye! Diego
  Reply With Quote

Old   June 4, 2004, 13:01
Default Re: Can't see Particle Tracks!
  #3
Lior
Guest
 
Posts: n/a
Hi Diego!

First, thanks for your answer. I did what you suggested from the beginning. I injected the particles in the Inlet, and made sure there is NO reverse flow, but it didn't help. I also tried to inject them in the middle of the vessel, but it didn't help as well. They jsut disappear! I defined Start and Stop times, and when the program iterates, it does inform me that particles are being injected in every iteration, however, when the iterations are done, NONE of the particles are found, and when i ask for the Report, it says that NO particle was inside the vessel!!! It's so weird, cause in the first time i tried to do it, it worked, but ever since then, it won't! Hope anyhone has any idea what i should do...

Thanks again,

Lior.
  Reply With Quote

Old   June 4, 2004, 19:59
Default Re: Can't see Particle Tracks!
  #4
Diego
Guest
 
Posts: n/a
maybe I wrong..., but when you open the mesh file in Fluent, did you scale it?. Another stuff that comes to my mind is that always, when you run a DPM model, first you have to converge the continous phase model (I mean without DPM interaction). It's wierd that you can't see the particles. And sorry about my english, I'm trying to improve it! hahaha! Best regards Diego
  Reply With Quote

Old   July 7, 2011, 02:04
Default
  #5
New Member
 
zino
Join Date: Mar 2010
Posts: 23
Rep Power: 16
zino is on a distinguished road
Well you should change your entrance to escape. I have modeled it with pressure inlet by talking it as escape. if it will be escape the paticle will escape through inlet towards outlet. for a bounded case you can try different kind of injection
zino is offline   Reply With Quote

Old   July 10, 2011, 04:43
Red face problem with tracking a particule??????
  #6
Member
 
daalou
Join Date: Feb 2011
Posts: 31
Rep Power: 15
alilouu is on a distinguished road
hI.
I would like to track a defined particule using DPM, but i did not know how it works;
please, could you show me the particularity of the dpm, and how it works.
thanks a lot.
alilouu is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting multiple flow data from particle tracks andreas_haakansson FLUENT 6 March 16, 2011 02:34
DPM UDF particle position using the macro P_POS(p)[i] dm2747 FLUENT 0 April 17, 2009 02:29
Particle Tracks Anand Siemens 2 October 10, 2005 14:38
Particle Tracks not visible Henrik Ström FLUENT 6 September 14, 2005 09:04
Particle tracks Sridhar FLUENT 0 October 5, 2002 13:19


All times are GMT -4. The time now is 01:56.