CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

oil aeration problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 19, 2011, 16:41
Unhappy oil aeration problem
  #1
New Member
 
Fran
Join Date: Oct 2010
Posts: 4
Rep Power: 15
wprostaff is on a distinguished road
Hi,
My problem can be described as three connected volumes. Inlet is located in the first volume and only air flows through it. Then air reachs the second volumen that is filled only with oil. In the end a mixture of air and oil droplets leaves the second volumen into the third volumen. The flow then develops and exits through the outlet. I'm mainly interested in the (air) pressure drop from inlet to oulet due to geometry and oil resistance. I'm using the mixture model with oil as the primary phase and air as the secondary phase. As BC, velocity inlet where I can define turbulence parameters for the mixture and velocity inlet for air and volume fraction for air equal to 1 (no oil through inlet). The other BC is pressure outlet. I've patched the second volumen with volume fraction for air equal to 0 (only oil in the beginning). I would expect air mixing with oil in the seconf volume and then exiting into the third volume and then through the outlet. I don't know if I'm making a big mistake but the problem refuses to converge. Could it be eulerian-eulerian a better modeling choice?Transient problem?
Thank you in advance
wprostaff is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
oil dripping heat transfer mactech001 Main CFD Forum 0 January 8, 2011 23:08
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13
oil combustion Krishnarao CFX 1 November 16, 2004 15:29


All times are GMT -4. The time now is 06:04.