control the stored text amount in the program window

eng.nassim · July 30, 2011, 14:31

dear all
I'm using a macro which print the moment value to the screen after every time step .
when I come back to handle the resulted moment values ,I found that the program had automatically deleted the older values and keep only the results of about47 time steps of overall 720 time steps.
how can I tell fluent to keep all the text had printed to the screen during the calculation process.
thanks in advance.

fox000002 · July 30, 2011, 22:37

Use transcript, or write moments to a file.

eng.nassim · July 31, 2011, 15:45

l've just tried to wrlte the moments to afile during the macro excuting an to replace the file with the new one automatically and it is working very well.
thanks very much 4 ur reply anyway, but what do you mean by trancecript this is new for me

fox000002 · July 31, 2011, 19:49

File/Write.../Start Transcript...

The output text will be written to a transcript file.

Remember to Stop Transcript at the end of the execution.

eng.nassim · August 1, 2011, 08:47

thanks very much i'll try it,although i thging that the first way " write moments to a file " is more easier to handle .

eng.nassim · September 16, 2011, 06:21

dear all
my results shows very low torque and consequently very low efficiency (~0.2 %) and in other cases (different values of TSR) negative average torque value, what does that mean???

July 30, 2011, 14:31	control the stored text amount in the program window	#1
eng.nassim New Member nassim swlyman Join Date: Aug 2009 Posts: 11 Rep Power: 16	dear all I'm using a macro which print the moment value to the screen after every time step . when I come back to handle the resulted moment values ,I found that the program had automatically deleted the older values and keep only the results of about47 time steps of overall 720 time steps. how can I tell fluent to keep all the text had printed to the screen during the calculation process. thanks in advance.

July 31, 2011, 15:45	thanks	#3
eng.nassim New Member nassim swlyman Join Date: Aug 2009 Posts: 11 Rep Power: 16	l've just tried to wrlte the moments to afile during the macro excuting an to replace the file with the new one automatically and it is working very well. thanks very much 4 ur reply anyway, but what do you mean by trancecript this is new for me

September 16, 2011, 06:21	low and negative torque	#6
eng.nassim New Member nassim swlyman Join Date: Aug 2009 Posts: 11 Rep Power: 16	dear all my results shows very low torque and consequently very low efficiency (~0.2 %) and in other cases (different values of TSR) negative average torque value, what does that mean???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Update boundary conditions calculated by an external program	CedricVH	OpenFOAM	2	January 15, 2010 11:55
Control the running of program	liu	OpenFOAM Running, Solving & CFD	2	July 27, 2005 06:01
control plotting in fortran program	zhe zhang	Main CFD Forum	2	November 16, 1999 13:10

July 30, 2011, 22:37		#2
fox000002 Member Join Date: Apr 2009 Posts: 46 Rep Power: 17	Use transcript, or write moments to a file.

July 31, 2011, 19:49		#4
fox000002 Member Join Date: Apr 2009 Posts: 46 Rep Power: 17	File/Write.../Start Transcript... The output text will be written to a transcript file. Remember to Stop Transcript at the end of the execution.

August 1, 2011, 08:47		#5
eng.nassim New Member nassim swlyman Join Date: Aug 2009 Posts: 11 Rep Power: 16	thanks very much i'll try it,although i thging that the first way " write moments to a file " is more easier to handle .