Modelling of a Mixing Tank in Workbench ANSYS 12.1

shadyenany · August 16, 2011, 13:30

Could any one help me to find a tutorial on how to model A mixing Tank in Workbench Ansys 12.1 (Fluent).??!!

Many Thanks

_Denis_ · August 16, 2011, 15:59

Is this what you've been searching for?

http://cfdcomputing.com/documents/fluent_tutorial2.htm

shadyenany · September 13, 2011, 11:16

Quote:

Originally Posted by _Denis_

Is this what you've been searching for?

http://cfdcomputing.com/documents/fluent_tutorial2.htm

many thanks denis for that, but have you got the same tutorial for gambit 3.2.16?!

damivez91 · January 14, 2014, 20:05

can i get this tutorial too..
i cant open link that u give

jamalf64 · January 15, 2014, 16:29

do you mean stirred tank?

damivez91 · February 18, 2014, 13:57

yes..
can u email it to me
dammattek@gmail.com

solmaz aryafar · February 20, 2014, 07:34

Hello,

I was searching for a tutorial on simulation of mixing tank with Fluent, and I found this post; I also cannot open the link! _Denis_ would you please mail it to me too?
my email address is: solmaz.aryafar@gmail.com
I would be very grateful for that.

aravindh · February 20, 2014, 12:02

i need mesh files to work in fluent 14.5

can anyone send me the link to download mesh files plssssss

thanks in advance

regards: s.aravindh

ashar_md2001 · November 7, 2014, 10:16

Hi Guys,
I am looking for mixing tank mesh files to work in fluent 15.0 and also tutorial

can you pls send me the link or file to download mesh file

thanks in advance

Regards
Ashar

surojittaurus · January 30, 2015, 00:42

Does anybody have the files, the website is not responding. If somebody has it, could you please send it to surojittaurus@gmail.com

Thanks

leovante · March 11, 2015, 10:31

Please send me too
Leovante@live.ru
Thnx

Natali · March 24, 2015, 02:05

Hi all. Please help me.
I need to get velocity field around mixer in a mixing tank. The goal is to determine dead zones. So, I import geometry of mixer with outside cylinder in DM. Than I use "enclosure" tool to create tank zone. After substracting ("cylinder" minus "mixer geometry") I get two parts. One part is a rotating cylinder with emptiness inside in the form of mixer. And the second part is square tank, that surrounds rotating frame.

I have some doubts about my geometry model. I read some article, that says about simulating blades like zero thickness wall. But as I understand it is impossible to enclosure zero thickness surface. How to simulate rotating frame in my case? Thank you in advance for any answer.

gaia.tess · June 9, 2017, 05:53

Hi all,
I was searching for a tutorial on mixing tank with Fluent too, and I found this post; I also cannot open the link http://cfdcomputing.com/documents/fluent_tutorial2.htm !
Can anyone suggest to me where to find it?

August 16, 2011, 13:30	Modelling of a Mixing Tank in Workbench ANSYS 12.1	#1
shadyenany New Member Shady ENANY Join Date: May 2011 Location: Leicester Posts: 24 Rep Power: 14	Could any one help me to find a tutorial on how to model A mixing Tank in Workbench Ansys 12.1 (Fluent).??!! Many Thanks

January 14, 2014, 20:05	hi..	#4
damivez91 New Member saddam jamaludin Join Date: Nov 2013 Posts: 2 Rep Power: 0	can i get this tutorial too.. i cant open link that u give

January 15, 2014, 16:29		#5
jamalf64 Senior Member Jamal Foroozesh Join Date: Oct 2012 Location: Iran Posts: 162 Rep Power: 13	do you mean stirred tank? damivez91 likes this.

February 20, 2014, 12:02	mesh files	#8
aravindh New Member aravindh Join Date: Feb 2014 Posts: 1 Rep Power: 0	i need mesh files to work in fluent 14.5 can anyone send me the link to download mesh files plssssss thanks in advance regards: s.aravindh

November 7, 2014, 10:16	need tank mesh file and tutorial	#9
ashar_md2001 New Member Mohamed Ashar Join Date: Feb 2011 Posts: 13 Rep Power: 15	Hi Guys, I am looking for mixing tank mesh files to work in fluent 15.0 and also tutorial can you pls send me the link or file to download mesh file thanks in advance Regards Ashar

August 16, 2011, 15:59		#2
_Denis_ New Member Denis Join Date: May 2011 Posts: 17 Rep Power: 14	Is this what you've been searching for? http://cfdcomputing.com/documents/fluent_tutorial2.htm

February 18, 2014, 13:57		#6
damivez91 New Member saddam jamaludin Join Date: Nov 2013 Posts: 2 Rep Power: 0	yes.. can u email it to me dammattek@gmail.com

February 20, 2014, 07:34		#7
solmaz aryafar New Member solmaz aryafar Join Date: Feb 2013 Posts: 11 Rep Power: 13	Hello, I was searching for a tutorial on simulation of mixing tank with Fluent, and I found this post; I also cannot open the link! _Denis_ would you please mail it to me too? my email address is: solmaz.aryafar@gmail.com I would be very grateful for that.

January 30, 2015, 00:42	Mixing Tank Files	#10
surojittaurus New Member Surojit Join Date: Sep 2014 Posts: 5 Rep Power: 11	Does anybody have the files, the website is not responding. If somebody has it, could you please send it to surojittaurus@gmail.com Thanks

March 11, 2015, 10:31		#11
leovante New Member Dmitry Join Date: Mar 2015 Posts: 3 Rep Power: 11	Please send me too Leovante@live.ru Thnx

June 9, 2017, 05:53		#13
gaia.tess New Member Gaga Tess Join Date: Jun 2017 Posts: 1 Rep Power: 0	Hi all, I was searching for a tutorial on mixing tank with Fluent too, and I found this post; I also cannot open the link http://cfdcomputing.com/documents/fluent_tutorial2.htm ! Can anyone suggest to me where to find it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial to help tank sloshing modelling (CFX 12.1)	enghamed	CFX	15	August 27, 2019 17:45
Problem with modelling contact in ansys fluent 12.1	mak86	FLUENT	16	August 27, 2019 09:07
Ansys workbench 12 and 12.1	ACER	CFX	0	April 29, 2011 21:43
Error in ansys Workbench 12.1	onn23	ANSYS	0	August 5, 2010 23:51
Modelling mixing tank using MRF	Adi	FLUENT	6	November 4, 2009 00:28