CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   How to obtain Elution curve (https://www.cfd-online.com/Forums/fluent/93081-how-obtain-elution-curve.html)

Ankit October 4, 2011 13:47

How to obtain Elution curve
 
I am trying to simulate an adsorption column which is being used to study the Elution curves and effect of porosity and temperature variations on the final results. I have made a single phase model in fluent. But in order to implement the Langmuir adsorption isotherm model in my problem; while designing my UDF for source term in the column I must have access to concentration of the two particles in the porous regime at any node. But since there is no phase present there; i cant use any macro in order to get this data. Can anyone suggest some alternative approach?
:confused:

AbdelkaderDZ March 27, 2013 09:54

Re: udf adorption
 
Dear fluent user, I have the same problem, Have you find the solution?


All times are GMT -4. The time now is 06:50.