CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Partially premixed model: Divergence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 7, 2011, 13:30
Default Partially premixed model: Divergence
  #1
New Member
 
Peter
Join Date: Oct 2011
Posts: 1
Rep Power: 0
kmcsekhar is on a distinguished road
Hello,
I am trying to do combustion analysis of a gasoline engine at octane lower than regular gasoline (which i assume as 90). The cases with octane numbers of 87 and 85 diverged giving: "Divergence detected in AMG solver: pressure correction". All the parameters were kept same from the 90 octane case which ran smoothly and gave me predicted results. Can anyone address this issue.
kmcsekhar is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
Atomization and Breakup model xck1986 OpenFOAM 4 May 31, 2014 05:43
Premixed combution -- divergence at the first iteration allamarein FLUENT 2 November 13, 2011 19:31
Turbulent premixed combustion error... XiFoam model achinta OpenFOAM 1 June 23, 2010 06:45
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 08:59.