|
[Sponsors] |
November 20, 2011, 13:28 |
Rigid Body mesh deforms
|
#1 |
New Member
Erki Leitaru
Join Date: Oct 2011
Posts: 1
Rep Power: 0 |
Hi, I have problem with rigid body movement. After about 500 steps the rigid body tends to deform. I have no idea how to fix it.
It is actually a 3D domain, but very thin. Rigid body is defined by four faces, grouped under name ns_kast. wall-sein_auguga and interior-sein_auguga are both automatically generated by Fluent and defined as deforming. Remeshing works fine when Rigid Body moves periodically up and down (defined by UDF). But it is not rigid, it deteoriates over time. Any ideas? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 07:41 |
Turbulent solver rigid body mechanics | philippose | OpenFOAM Running, Solving & CFD | 53 | July 16, 2011 14:35 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 22:11 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |
Dynamic meshing: UDF for rigid body Motion | Manoj Kumar | FLUENT | 0 | June 20, 2005 02:02 |