Premixed gas in closed tube

sfdx · December 8, 2011, 00:00

Hi Everyone

I am a new fluent user and have some questions when I am trying to modeling premixed mixture combustion in closed tube. My model is a closed tube, filled with methane and air, then ignite on a point to see how does flame develop in the tube.

Does anyone has related models or tutorials?

Thanks

sooroo3 · December 25, 2013, 04:28

Did you try the case, "premixed flame in closed tube"?
I am also interested in this case. I am trying this case by using Species Transport Model with volumetric reaction, but, it is hard to get flame. Do you have any comments?

December 8, 2011, 00:00	Premixed gas in closed tube	#1
sfdx New Member Join Date: Dec 2011 Posts: 1 Rep Power: 0	Hi Everyone I am a new fluent user and have some questions when I am trying to modeling premixed mixture combustion in closed tube. My model is a closed tube, filled with methane and air, then ignite on a point to see how does flame develop in the tube. Does anyone has related models or tutorials? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
Constant velocity of the material	Sas	CFX	15	July 13, 2010 09:56
Gas filling in closed vessel	chanfire	CFX	3	February 16, 2010 18:23
how to realize the premixed gas in the tube	Frankly	Phoenics	2	April 3, 2005 14:30
Gas pressure question	Dan Moskal	Main CFD Forum	0	October 24, 2002 23:02

December 25, 2013, 04:28		#2
sooroo3 New Member YG Kim Join Date: Nov 2010 Posts: 15 Rep Power: 17	Did you try the case, "premixed flame in closed tube"? I am also interested in this case. I am trying this case by using Species Transport Model with volumetric reaction, but, it is hard to get flame. Do you have any comments?