|
[Sponsors] |
December 9, 2011, 19:03 |
XY-Plots
|
#1 |
Member
Join Date: Jan 2011
Posts: 45
Rep Power: 15 |
Hi,
I run a steady-state simulation for a porous disk inside a tank. Results of velocity magnitude contours in XY and a XZ planes are shown in fig-1. Using Surface > Line/Rake I plot velocity results along the X, Y, and Z axis, fig-2, fig-3 and fig-4 respectively. But how I know and how I choose what Y-Z coordinate for the X along plot, X-Z coordinate for the Y along plot, and X-Y coordinate for the Zalong plot? Thanks in advance. Regards, Eduardo Fig-1: Velocity magnitude contours for XY and XZ planes. Fig-2: Velocity magnitude along X axis. Fig-3: Velocity magnitude along Y axis. Fig-4: Velocity magnitude along Z axis. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFX Contour Plots Troubleshooting | derz | CFX | 7 | November 21, 2010 10:08 |
Cp Plots | Saj | STAR-CCM+ | 1 | October 12, 2010 09:50 |
vector plots and contour plots do not match | swati_mohanty | FLUENT | 1 | August 26, 2010 05:53 |
Smooth plots of external data | samu | Siemens | 2 | May 21, 2006 13:08 |
drawing of contour plots | chinthakindi | Main CFD Forum | 1 | April 27, 2004 04:33 |