left handed problem

MatJo · May 14, 2014, 05:04

hi everyone,

i need your help, right now i doing under graduated project, i do the simulation of scavenging process, so, i mesh the geometry using ICEM, after i import to fluent, it said there is left-handed,

so, anyone can suggest me how to remove this problem, i really appreciate if members this forum can help me.

i give my cas file, hope your all can look out on my case file

https://www.mediafire.com/?8zmtqtn1qv8g8ah

villager · May 14, 2014, 13:46

There's a problem with mesh - try Meshing forum.
As it seems to me, you have some faces overlapping - you didn't done face connection? Or would you use non-conformal mesh? in gambit, face connect command could help after geometry construction.

MatJo · May 14, 2014, 21:27

Quote:

Originally Posted by villager

There's a problem with mesh - try Meshing forum.
As it seems to me, you have some faces overlapping - you didn't done face connection? Or would you use non-conformal mesh? in gambit, face connect command could help after geometry construction.

thank for you reply, i use ICEM for meshing, i still beginner in this software, how to solve it, can you teach me, this is my e-mail, m.zarithothman@gmail.com, please

May 14, 2014, 05:04	left handed problem	#1
MatJo New Member Join Date: Feb 2014 Posts: 5 Rep Power: 12	hi everyone, i need your help, right now i doing under graduated project, i do the simulation of scavenging process, so, i mesh the geometry using ICEM, after i import to fluent, it said there is left-handed, so, anyone can suggest me how to remove this problem, i really appreciate if members this forum can help me. i give my cas file, hope your all can look out on my case file https://www.mediafire.com/?8zmtqtn1qv8g8ah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
area does not match neighbour by ... % -- possible face ordering problem	St.Pacholak	OpenFOAM	10	February 7, 2024 21:50
Problem Importing Geometry ProE to CFX	fatb0y	CFX	3	January 14, 2012 19:42
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
What is right- and left handed	magnus wikander	FLUENT	2	December 1, 2004 12:34
how to treat left handed faces	xiang	FLUENT	1	March 10, 2003 07:08

May 14, 2014, 13:46		#2
villager Member vlg Join Date: Jul 2011 Location: My home :) Posts: 81 Rep Power: 17	There's a problem with mesh - try Meshing forum. As it seems to me, you have some faces overlapping - you didn't done face connection? Or would you use non-conformal mesh? in gambit, *face connect* command could help after geometry construction.