problem with unwanted faces..

alejandro_1980 · February 10, 2012, 18:00

when i am trying to connect two meshed volumes that have a common face for conection...(example the cilinder out surface mesh is the same as the hole of a rectangular meshed volume (both face meshes are identical )gambit creates a unwanted wall...

how can i fix that problem with Tgrid???

or what can i do to dissapear that unwanted face???

-mAx- · February 13, 2012, 01:21

no idea with Tgrid (but should be the same as in gambit), but common faces, shold be set as interface, and then in Fluent create grid interfaces by selecting both interfaces

alejandro_1980 · February 13, 2012, 12:12

Quote:

Originally Posted by -mAx-

no idea with Tgrid (but should be the same as in gambit), but common faces, shold be set as interface, and then in Fluent create grid interfaces by selecting both interfaces

thank you for your asessment Max.. i m wondering. what about the link that you sent me last time?? the one about Tgrid in some chapter of Fluent .. i tried last time and does not work anymore..

thank you anyway...

-mAx- · February 14, 2012, 07:17

which one?

alejandro_1980 · February 14, 2012, 21:02

Quote:

Originally Posted by -mAx-

which one?

this link...http://cdlab2.fluid.tuwien.ac.at/LEH...ug/node138.htm .. but it is working again.. thank you Max..

February 10, 2012, 18:00	problem with unwanted faces..	#1
alejandro_1980 New Member alejandro alonzo garcia Join Date: Sep 2010 Location: mexico D.F. Posts: 13 Rep Power: 15	when i am trying to connect two meshed volumes that have a common face for conection...(example the cilinder out surface mesh is the same as the hole of a rectangular meshed volume (both face meshes are identical )gambit creates a unwanted wall... how can i fix that problem with Tgrid??? or what can i do to dissapear that unwanted face???

February 13, 2012, 01:21		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	no idea with Tgrid (but should be the same as in gambit), but common faces, shold be set as interface, and then in Fluent create grid interfaces by selecting both interfaces __________________ In memory of my friend Hervé: CFD engineer & freerider

February 14, 2012, 07:17		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	which one? __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem : "reversed flow in 77 faces on outflow 12."	aliamini	FLUENT	15	February 6, 2014 14:06
problem due to reconstructPar?	doubtsincfd	OpenFOAM	0	June 3, 2011 16:16
[ICEM] Problem with meshing (uncovered faces, can't export bocos)	hectordiaz	ANSYS Meshing & Geometry	16	May 13, 2011 06:36
Converting Virtual Faces to Real Faces in Gambit	gstraw	Main CFD Forum	0	June 19, 2009 07:11
Error to re-open fluent case file	J.Gimbun	FLUENT	0	April 27, 2006 08:42