 |
 |
 |
|
|
|
[Sponsors] | ||||
Vroticess not appearing in motor combustion flow |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 23, 2012, 04:31
|
Vroticess not appearing in motor combustion flow
|
#1 |
|
Senior Member
Shamoon Jamshed
Join Date: Apr 2009
Location: Karachi
Posts: 377
Rep Power: 17   |
I am simulating burning of a segmented rocket motor C1xb. The steady simulations should have vortices appearing in the flow. While I tried both steady and then transient simulations I do not get any vortices. I dont know why. My boundary conditions are Mass flux inlet. Nozzle exit as pressure outlet, ilet pressure is 12 bar and wall boundary conditions.
What pressure should I put at pressure outlet? Atmos. pressure or calculated pexit and then put this in pr outlet. |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
| Flow meter Design | CD adapco Group Marketing | Siemens | 3 | June 21, 2011 08:33 |
| What is the difference between liquid reactive flow and gas reactive flow? | James | Main CFD Forum | 6 | May 15, 2009 12:14 |
| Advice on multi-phase flow modelling | Martin | Main CFD Forum | 3 | October 14, 2008 05:16 |
| potential flow vs. Euler flow | curious ... | Main CFD Forum | 23 | July 21, 2006 07:40 |
Linear Mode
