|
[Sponsors] |
March 26, 2012, 11:43 |
assigning phases in fluent
|
#1 |
New Member
adam
Join Date: Mar 2012
Posts: 1
Rep Power: 0 |
Hi,
i am using the VOF model in Fluent to model the explosive boiling of liquid nitrogen at 77k when it is injected and mixes with water at 300k. under the cell zone conditions i cant seem to assign different phases to each of the fluid zones. how do i do this? there are 3 phases that need to be assigned to 3 different regions of the mesh https://rapidshare.com/files/1878796...one_4-_air.bmp https://rapidshare.com/files/1166897...e_5-_water.bmp https://rapidshare.com/files/5946291...6-nitrogen.bmp |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two questions on Fluent UDF | Steven | Fluent UDF and Scheme Programming | 7 | March 23, 2018 03:22 |
Error in reading Fluent 13 case file in fluent 12 | apurv | FLUENT | 2 | July 12, 2013 07:46 |
Fluent 6.3 32bit vs Fluent 12.0 64bit | ibex7 | FLUENT | 7 | April 18, 2011 02:44 |
Fluent 12.0 is worst then Fluent 6.2 | herntan | FLUENT | 5 | December 14, 2009 02:57 |
How to set 2 phases in Fluent: Mixture & Water | JW | FLUENT | 7 | May 26, 2006 10:10 |