|
[Sponsors] |
'grid sheet not visible' and mesh 'refinement' in GridPro |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 17, 2013, 11:02 |
'grid sheet not visible' and mesh 'refinement' in GridPro
|
#1 |
New Member
Uwe
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
Hi,
I want to create 2D multiblock grids for rotational symmetric channel flow simulation with an inhouse code. I am not yet used to GridPro, but it seems to make good quality multiblock grids. I encounter a problem when I want to display may finished grid. It is not drawn. The block boundarys are plotted, but not the grid lines. I activated 'GRID' and 'she'. A grid is displayed when I choose panel=P instead of T or G. Does anyone know what I messed up? I have already seen a grid.... The second problem is that I do not know exactly how to get a mesh refinement at the walls. right now, the block-block boundary and in- and outflow are refined, but normal to the wall the grid is equidistant. Has anyone an idea where to look at? thanks! Uwe |
|
April 26, 2013, 07:16 |
Mesh
|
#2 |
Member
Sam
Join Date: Mar 2009
Posts: 35
Rep Power: 17 |
Hi ,
Were you able to figure out the issue? |
|
April 27, 2013, 06:38 |
|
#3 |
New Member
Uwe
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
Hi,
yes, I was. Thanks for asking and sorry for not posting it here. The problem with displaying the grid was caused by the usage of a VNC connection. Without that, it works. The mesh refinement procedure in GridPro is also clear to me now. I was used to a method, that distributes grid points along a boundary. Uwe |
|
Tags |
refinement |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Number of cells in mesh don't match with size of cellLevel | colinB | OpenFOAM Meshing & Mesh Conversion | 14 | December 12, 2018 09:07 |
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh | Elise | OpenFOAM Meshing & Mesh Conversion | 1 | April 22, 2013 03:32 |
[snappyHexMesh] snappyHexMesh refinement regions ignored | guitarbren | OpenFOAM Meshing & Mesh Conversion | 2 | April 9, 2013 04:59 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 10:03 |
[snappyHexMesh] Weird snapping outside a refinement region | jasimpson89 | OpenFOAM Meshing & Mesh Conversion | 0 | July 29, 2012 21:46 |