Creating User Defined Solver Format for exporting Grids

JamesDoesCFD · July 26, 2017, 13:18

The GridPro GUI manual mentions a way to create your own Solver Format. The manual states, "the script file to be run should be kept inside GridPro/az_mngr directory in order to access it while exporting the grid to user specific solver" (GridPro, 2017). I was wondering if anyone had experience writing one of these scripts, or could point me to documentation explaining how it should be done.

vimaero · August 29, 2017, 07:17

Hi james,

The scripts are written by the users who want to use their own solver format. It should contain information on how to convert the GridPro grid format(which can be found in TIL_Manuals) to the user's solver format. In appendix A of WS_GUI_Manual, you will find the help for accessing the script from the GUI. It does not have any info on script writing since it's entirely depends on the users.

Regards,
Vimal

July 26, 2017, 13:18	Creating User Defined Solver Format for exporting Grids	#1
JamesDoesCFD New Member Join Date: Jul 2017 Posts: 2 Rep Power: 0	The GridPro GUI manual mentions a way to create your own Solver Format. The manual states, "the script file to be run should be kept inside GridPro/az_mngr directory in order to access it while exporting the grid to user specific solver" (GridPro, 2017). I was wondering if anyone had experience writing one of these scripts, or could point me to documentation explaining how it should be done.

August 29, 2017, 07:17	It helps to access your solver format from the GUI for easier grid conversion	#2
vimaero New Member Vimalraj Join Date: Apr 2013 Location: Bangalore Posts: 29 Rep Power: 12	Hi james, The scripts are written by the users who want to use their own solver format. It should contain information on how to convert the GridPro grid format(which can be found in TIL_Manuals) to the user's solver format. In appendix A of WS_GUI_Manual, you will find the help for accessing the script from the GUI. It does not have any info on script writing since it's entirely depends on the users. Regards, Vimal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
User defined memory value changing	minhoabc	FLUENT	2	June 22, 2017 06:28
User Junction Box in CFX: Example 1 from the Solver Modeling Guide	gt_moe	CFX	3	May 26, 2016 10:40
OpenFOAM static build on Cray XT5	asaijo	OpenFOAM Installation	9	April 6, 2011 12:21
user defined turbulence model	manuutin	STAR-CD	5	October 14, 2009 05:29
CFX 5.5	Roued	CFX	1	October 2, 2001 16:49