is it sofware or hardware problem?

truffaldino · June 26, 2012, 08:10

I have a problem with speed of execution for the program written in fortran 90/95.

I have two computers: one is a simple desctop and another is multi-core laptop with faster processors, bigger memories etc. Both computers have 64-bit windows on them. I expected that the program will run faster on sophisticated laptop.

But it turns out that some subroutines in the program go 3 times slower on "sophisticated" machine, while other subroutines go with approximately the same speed.

Is it sofware or hardware problem? I was using silverfrost FTN95 free personal edition compiler for the program.

Will be grateful for your input

Truffaldino

CapSizer · June 26, 2012, 13:16

You are going to have to be a lot more specific if you want any useful advice, such as the exact specifications of the two computers and their operating systems.

abdul099 · July 6, 2012, 20:34

Not only that. There might be a lot of differences in the subroutines. For example, what is the common thing of all "slow" subroutines? Lot of integer calculations? Lot of floating point calculations? Lot of memory access? Lot of communication between processors? Writing to hard disks?

All of that could have an influence, and some could be related to the hardware while other stuff could be just the software not adopted to the hardware.

June 26, 2012, 08:10	is it sofware or hardware problem?	#1
truffaldino Senior Member Join Date: Jan 2011 Posts: 249 Blog Entries: 5 Rep Power: 17	I have a problem with speed of execution for the program written in fortran 90/95. I have two computers: one is a simple desctop and another is multi-core laptop with faster processors, bigger memories etc. Both computers have 64-bit windows on them. I expected that the program will run faster on sophisticated laptop. But it turns out that some subroutines in the program go 3 times slower on "sophisticated" machine, while other subroutines go with approximately the same speed. Is it sofware or hardware problem? I was using silverfrost FTN95 free personal edition compiler for the program. Will be grateful for your input Truffaldino

July 6, 2012, 20:34		#3
abdul099 Senior Member Join Date: Oct 2009 Location: Germany Posts: 636 Rep Power: 21	Not only that. There might be a lot of differences in the subroutines. For example, what is the common thing of all "slow" subroutines? Lot of integer calculations? Lot of floating point calculations? Lot of memory access? Lot of communication between processors? Writing to hard disks? All of that could have an influence, and some could be related to the hardware while other stuff could be just the software not adopted to the hardware. __________________ We do three types of jobs here: GOOD, FAST AND CHEAP You may choose any two!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with interFoam; Wave/wiggle alpha1 behavior	JonW	OpenFOAM	10	February 4, 2023 07:27
[Other] engineFoam new mesh problem	ayhan515	OpenFOAM Meshing & Mesh Conversion	5	August 10, 2015 08:45
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
problem with using colocated code	Jack	Main CFD Forum	0	December 15, 2002 00:15

June 26, 2012, 13:16		#2
CapSizer Senior Member Charles Join Date: Apr 2009 Posts: 185 Rep Power: 18	You are going to have to be a lot more specific if you want any useful advice, such as the exact specifications of the two computers and their operating systems.