CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Hardware

Office Workstation for OpenFOAM etc

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree3Likes
  • 1 Post By Simbelmynė
  • 1 Post By wkernkamp
  • 1 Post By flotus1

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 23, 2019, 08:53
Default Office Workstation for OpenFOAM etc
  #1
New Member
 
Kevin Nolan
Join Date: Nov 2012
Posts: 10
Rep Power: 13
Kolan is on a distinguished road
Hi,
I'm an experimentalist (long time lurker here) who dabbles in CFD. I'm looking to build an office workstation for PIV processing, image analysis (Schlieren etc), 3D rendering, and an increasing amount of OpenFOAM and maybe some Ansys and COMSOL (depending on the University license situation).

I'd like a machine that lets me run exploratory simulations and test cases that can then be sent to our HPC facilities. I'm looking at viscoelastic instability using the likes of rheoTool.

My initial thoughts are:
CPU: Intel - Core i7-9800X (I suspect there'll be memory bandwidth issues pushing all cores?)
Cooler: Noctua - NH-D15 (I find these tend to be as good as a water cooling system)
Motherboard: ASUS PRIME X299-DELUXE (no other reason than I've had good experience with ASUS boards in the past)
Memory: Undecided but the CPU supports 128 GB and I figure I don't really need ECC.
GPU: I've a GTX 1070 that I can use here
Disk: 1TB Samsung Evo. I would like to go solid state, is M.2 nvme worthwhile or should I stick to SATAIII? Might do both. I have a QNAP RAID for local storage.
PSU and Case: 750W is more than enough and I'll stick with Corsair as reliable brands.

I'll be running ubuntu.

I've not had much experience with AMD but I'm open to suggestions. I know they deliver a lot more performance per euro.

Any feedback would be very much appreciated.
Thank you.
Kolan is offline   Reply With Quote

Old   May 23, 2019, 14:48
Default
  #2
Senior Member
 
Simbelmynė's Avatar
 
Join Date: May 2012
Posts: 544
Rep Power: 15
Simbelmynė is on a distinguished road
Where I'm sitting the 9800X has the same price as TR 2920X. However there is no availability of 9800X at the lowest price point so here you'd have to pay a premium for it. For straight up CFD they will probably perform very similar, given that you mount the same type of memory (the 9800X can probably manage higher speed memory though).


3D rendering and image analysis usually benefit from a high core count so I expect the Threadripper to be of more use then.


Also, with the latest security flaws in the Intel camp, we can probably expect the performance of previous benchmarks to be misleading



https://www.phoronix.com/scan.php?pa...oad-mit&num=10


In terms of the other choices I have no comments, they all seem ok to me.
Kolan likes this.
Simbelmynė is offline   Reply With Quote

Old   May 23, 2019, 15:40
Default
  #3
New Member
 
Kevin Nolan
Join Date: Nov 2012
Posts: 10
Rep Power: 13
Kolan is on a distinguished road
Do you think it’s worth waiting for the third generation Threadripper? I’m in no major hurry.
Kolan is offline   Reply With Quote

Old   May 23, 2019, 19:46
Default Look at Epyc 7301
  #4
Senior Member
 
Will Kernkamp
Join Date: Jun 2014
Posts: 301
Rep Power: 12
wkernkamp is on a distinguished road
Performs really well on benchmarks. $800 cpu, 8 memory channels.
Kolan likes this.
wkernkamp is offline   Reply With Quote

Old   May 23, 2019, 19:56
Default
  #5
New Member
 
Kevin Nolan
Join Date: Nov 2012
Posts: 10
Rep Power: 13
Kolan is on a distinguished road
I’ve seen the extensive discussion on the EPYC systems here. It looks great!
However I think a server CPU may be overkill for my needs when I’ve access to the University’s HPC facilities. I don’t want to turn my office into a loud, hot server room!
Kolan is offline   Reply With Quote

Old   May 24, 2019, 09:51
Default
  #6
Super Moderator
 
flotus1's Avatar
 
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,396
Rep Power: 46
flotus1 has a spectacular aura aboutflotus1 has a spectacular aura about
A system with a single Epyc 7351P won't draw significantly more power than any of the HEDT systems. It won't turn your office into a server room.
However, they can be a bit sluggish for daily use and lightly threaded tasks due to the low clock speed.
If you don't need the system right now it is always a good idea to wait. Memory prices are still falling and second gen Epyc CPUs are due this fall. I've heard rumors that there won't be another iteration of Threadripper any time soon though. Maybe thy will be merged into the Epyc lineup...
Kolan likes this.
flotus1 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Suggestions for StarCCM+ Workstation configuration ifil Hardware 15 October 30, 2018 06:09
Another Workstation spec questions.... jeanhyuk Hardware 4 July 10, 2018 06:37
Abysmal performance of 64 cores opteron based workstation for CFD Fauster Hardware 8 June 4, 2018 11:51
Recommendation to buy a workstation 2018 sherlock Hardware 3 March 6, 2018 09:41
Dual cpu workstation VS 2 node cluster single cpu workstation Verdi Hardware 18 September 2, 2013 04:09


All times are GMT -4. The time now is 16:16.