CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Hardware (https://www.cfd-online.com/Forums/hardware/)
-   -   workstation for fsi (https://www.cfd-online.com/Forums/hardware/223933-workstation-fsi.html)

flotus1 February 19, 2020 06:30

Pretty much the whole point of this build was getting 8 memory channels. Again, you need 8 DIMMs, either 8x8GB or 8x16GB. New or used doesn't matter, whatever you can get your hands on cheaper will do. DDR4-2400 memory modules will be clocked at DDR4-2133 automatically when used in this setup.


All times are GMT -4. The time now is 21:24.