CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Hardware

Advice needed: Buying a PC

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 12, 2009, 07:47
Smile Advice needed: Buying a PC
  #1
New Member
 
fateme chegini
Join Date: Jul 2009
Posts: 6
Rep Power: 16
fateme is on a distinguished road
Dear All

I am planning to buy a new PC. I am currently writing my own NS Fortran code (3D & structured). I think at the most I would need about 500*200*50 grids, which would probably need about 1GB meomory. But the problem is that the simulation time is very large, so I would need as much speed as I can get.

I would very much appreciate your help about these questions:

1. Does any one have experience with AMD cpus? Are they better than Intel or not?

2. What about CORSAIR 1600 (-Dominator) Ram? It's price is about $100 higher than CORSAIR 1333. Does it influence the efficiency of the PC or not?

3. Which one is better? "Intel Core 2 Duo E8400 - 3.0GHz " or "Intel Core 2 Quad Q9550 - 2.83GHz"
The first one has 6MB cache and the second 12MB. Do you think the Q9550 is worth the price?

Thanks in advance
fateme is offline   Reply With Quote

Old   December 14, 2009, 09:59
Default
  #2
Member
 
TonyD
Join Date: Apr 2009
Posts: 85
Rep Power: 17
bramv101 is on a distinguished road
1. at the moment I would stay away from consumer AMS CPU's, for high end CPU's its another case
2. Every aspect of your I/O will influence your final speed. RAM, harddrive, bus speed etc... all influence your performance. SO dont ruin a perfect system with a slow 5400RPM diskdrive
3.Only go for multicore CPU's when you can solve in parallel (there is no other benefit to this)

lowest system specs: go for a fast intel i5 quad, 4Gb RAM, 12k hard drive and DDR3 1600Mhz

mid-end:xeon 5500 series or i7, solid state HDD, 8Gb RAM, 64bit OS, DDR3 1600+
bramv101 is offline   Reply With Quote

Old   December 14, 2009, 13:09
Default
  #3
New Member
 
fateme chegini
Join Date: Jul 2009
Posts: 6
Rep Power: 16
fateme is on a distinguished road
Thanks for the help Bram.

Could you please help me with these questions too?

1.What do you mean by I/O? Does it mean input/output?
2. Is the performance of the i7 cpus much better than the Intel core2 quads?
3. Does having a 64 bit OS or a 32bit make a difference? Is the 64 faster?
fateme is offline   Reply With Quote

Old   December 14, 2009, 13:36
Default
  #4
Senior Member
 
Ryne Whitehill
Join Date: Aug 2009
Posts: 312
Rep Power: 18
rwryne is on a distinguished road
Quote:
Originally Posted by fateme View Post
Thanks for the help Bram.

Could you please help me with these questions too?

1.What do you mean by I/O? Does it mean input/output?
2. Is the performance of the i7 cpus much better than the Intel core2 quads?
3. Does having a 64 bit OS or a 32bit make a difference? Is the 64 faster?

1. yes he means input/output. He is basically saying the chain is only as strong as the weakest link (computer is only as fast as slowest component!)

2. yes, i7s are faster than core2quads. I imagine if you go to a website such as Tom's Hardware you can find lots of benchmark test comparisons

3. It certainly matters if you plan on using more than 3.5 gigs of memory (32-bit operating systems** have a ~3.5 gb limit)

that is where the speed difference between 32-bit/64-bit comes from

** from my understanding, you can apply changes to the linux kernel to "fix" this. I have never really looked into this though
rwryne is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Prism layer advice needed for port flow case MaxCFM ANSYS Meshing & Geometry 0 October 2, 2009 08:42
Fluid dispersion into a free stream - Advice needed please LSF FLUENT 0 April 12, 2009 08:45
Hardware extension advice needed Luk CFX 7 February 2, 2009 18:05
SUPG for 2-D Navier-Stokes advice needed.. nicole Main CFD Forum 2 November 23, 2002 00:06
advice needed! Filip Main CFD Forum 2 April 26, 2002 15:27


All times are GMT -4. The time now is 10:54.