|
[Sponsors] |
Looking for some good meshing literature and tutorials |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Anonymous
Join Date: Jul 2017
Posts: 2
Rep Power: 0 ![]() |
Hi, I am new here. I am looking to develop my meshing skills. Would love your suggestions on where to start, Literature, tutorials and what software to use. Also need to know if ansys workbench built in mesher is good enough?
Much appreciate if you can direct me to a older thread. Thanks Sent from my XT1254 using CFD Online Forum mobile app |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Rick Matus
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 116
Rep Power: 15 ![]() |
You could start here: https://www.cfd-online.com/Links/meshing.html
If it was me, I would just go straight to Pointwise and not waste my time on anything else. ![]() |
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Anonymous
Join Date: Jul 2017
Posts: 2
Rep Power: 0 ![]() |
||
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|