|
[Sponsors] |
April 19, 2012, 13:12 |
how to set 2 boundary condition on a surface
|
#1 |
New Member
acAB
Join Date: Apr 2012
Posts: 2
Rep Power: 0 |
let say i have i cubic volume.. on one of is faces, i would like to have a smaller face that i can define as another zone (velocity inlet)..
........................... . ............ . . . . . . . . . . ............ . . . ........................... the bigger face is the wall and the smaller face is the face that i would like to define as velocity inlet. How can i meshed this volume |
|
April 19, 2012, 14:15 |
|
#2 |
New Member
Yasin Besari Mustofa
Join Date: Nov 2011
Location: Indonesia
Posts: 8
Rep Power: 14 |
you can make inlet geometry at one side of cubic face and then define inlet with different part from other face.
|
|
April 19, 2012, 16:17 |
|
#3 |
New Member
acAB
Join Date: Apr 2012
Posts: 2
Rep Power: 0 |
how am i going to do that ?? my problem in that once i've created the volume and a smaller size face in the cubic surface, the meshed file won't detect it as a zone in fluent. so, i can't define the booundary.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Spillway Analysis Fixed Water Surface Boundary Condition | mgdenno | OpenFOAM Running, Solving & CFD | 17 | December 9, 2018 18:37 |
mixed inflow/outflow downstream boundary condition question | peob | OpenFOAM Running, Solving & CFD | 3 | February 3, 2017 11:54 |
boundary condition of an internal surface | ynsudo | OpenFOAM Running, Solving & CFD | 7 | September 14, 2011 05:17 |
how can I set up nonuniform boundary condition? | arezo.namazi | OpenFOAM | 1 | June 6, 2010 19:52 |
Boundary condition of free surface model | Tony | FLUENT | 3 | September 27, 2004 14:48 |