|
[Sponsors] |
October 6, 2005, 06:30 |
Boundary condition of mixture fraction
|
#1 |
Guest
Posts: n/a
|
Dear all,
could anyone explain how we can specify the boundary condition of mixture fraction at the wall? i am dealing with simulation of turbulent confined diffusion flame and i have problem related to the mixture fraction b.c at the wall. thanks in advance for your kind help, regards, lola |
|
October 6, 2005, 10:17 |
Re: Boundary condition of mixture fraction
|
#2 |
Guest
Posts: n/a
|
Usually d(mix frac)/dn = 0, where n is the direction normal to boundary, is used.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Setting outlet Pressure boundary condition using CAFFA code | Mukund Pondkule | Main CFD Forum | 0 | March 16, 2011 03:23 |
On the damBreak4phaseFine cases | paean | OpenFOAM Running, Solving & CFD | 0 | November 14, 2008 21:14 |
CFX Solver Memory Error | mike | CFX | 1 | March 19, 2008 07:22 |
Slip boundary condition what is inside | normunds | OpenFOAM Running, Solving & CFD | 2 | June 4, 2007 06:45 |