CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Simulating square cylinder using cartesian grid?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 4, 2005, 05:15
Default Simulating square cylinder using cartesian grid?
  #1
zonexo
Guest
 
Posts: n/a
Hello,

I currently 've a FVM navier stokes code which uses cartesian grids. Can I simulate flow past a square cylinder using this code? Will the cartesian grid pose any problem?

If can, does it mean that I need to ignore those cells which are inside the cylinder?

Thank you.
  Reply With Quote

Old   October 4, 2005, 05:33
Default Re: Simulating square cylinder using cartesian gri
  #2
ramp
Guest
 
Posts: n/a
Yes, you can solve the square cylinder problem with the Cartesian grid. While solving, ignore the point which are inside the square cylinder and impose the no-slip boundary conditions at the surface of the cylinder.

The following reference (and reference therein) will give you enough details for this problem:

# A. K. Dhiman, R. P. Chhabra, V. Eswaran (2005), Flow and Heat Transfer Across a Confined Square Cylinder in the Steady Flow Regime: Effect of Peclet Number, International Journal of Heat and Mass Transfer, 48, 4598 - 4614.

# A. Sharma and V. Eswaran, Heat and fluid flow across a square cylinder in the two-dimensional laminar flow regime, Numer. Heat Transfer Part A 45 (2004), pp. 247â€"269.

#A. Sharma and V. Eswaran, Effect of adding and opposing buoyancy on the heat and fluid flow across a square cylinder at Re = 100, Numer. Heat Transfer Part A 45 (2004), pp. 601â€"624

# A. Sharma and V. Eswaran, Effect of channel-confinement on the two-dimensional laminar flow and heat transfer across a square cylinder, Numer. Heat Transfer Part A 47 (2005), pp. 79â€"107.

# A. Mukhopadhyay, G. Biswas and T. Sundararajan, Numerical investigation of confined wakes behind a square cylinder in a channel, Int. J. Numer. Methods Fluids 14 (1992), pp. 1473â€"1484.

# A.K. Gupta, A. Sharma, R.P. Chhabra and V. Eswaran, Two-dimensional steady flow of a power law fluid past a square cylinder in a plane channel: momentum and heat transfer characteristics, Ind. Eng. Chem. Res. 42 (2003), pp. 5674â€"5686.

# A. Sohankar, L. Davidson, C. Norberg, Numerical simulation of unsteady flow around a square two-dimensional cylinder, in: Proceedings of the 12th Australian Fluid Mechanics Conference, Sydney, Australia, 1995, pp. 517â€"520.
  Reply With Quote

Old   October 4, 2005, 07:39
Default Re: Simulating square cylinder using cartesian gri
  #3
zonexo
Guest
 
Posts: n/a
wow, ramp, where did u find all that info within such a short time?

Thanks you very much!

  Reply With Quote

Old   October 4, 2005, 16:45
Default Re: Simulating square cylinder using cartesian gri
  #4
Jim_Park
Guest
 
Posts: n/a
You might also check the article in Scientific American, probably in the 60's. It's by Frank Harlow and Jacob Fromm. They used stream function - vorticity.

This was certainly one of the earliest expositions of computational fluids to the scientific community.
  Reply With Quote

Old   October 10, 2005, 07:14
Default Re: Simulating square cylinder using cartesian gri
  #5
zonexo
Guest
 
Posts: n/a
hi, i'm in the process of implementing the BC. if i ignore the pts(cells) inside the sq. cylinder, i've 3 options -

1.i exclude the cells from the sys. of linear eqns and solve it, but the numbering of cells will be quite difficult

2. i include them in the sys. of linear eqns and solve it, but will that cause instability such as 0/0?

3. i include them in the sys. of linear eqns, assign an arbitrary value to center coefficient of the eqn (along main diagonal) and and solve it

Is the 3rd option the best? or is there some other better options?

thanks
  Reply With Quote

Old   October 10, 2005, 09:12
Default Re: Simulating square cylinder using cartesian gri
  #6
ramp
Guest
 
Posts: n/a
I think the first option is good... anyhow u need to define the location of cylinder and the cells inside the square cylinder... and also it is not as such difficult in Cartesian grid... U directly know the coordinates numbering of the sqaure.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need advices for simulating vortex shedding of moving cylinder quyetthang CFX 0 October 1, 2011 06:39
[blockMesh] Grid generation cross flow over circular cylinder Yanma OpenFOAM Meshing & Mesh Conversion 0 July 7, 2010 09:02
top side and bottom side of cylinder as seperate entities i grid generation ryan ANSYS Meshing & Geometry 1 November 9, 2009 02:17
grids for flow over a square cylinder student Main CFD Forum 4 April 21, 2009 07:50
Grid Independent Solution Chuck Leakeas Main CFD Forum 2 May 26, 2000 12:18


All times are GMT -4. The time now is 12:12.