CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Fluid-solid flow in pipe model...need help..

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 11, 2012, 14:07
Default Fluid-solid flow in pipe model...need help..
  #1
New Member
 
Oat Mongkhol
Join Date: May 2012
Posts: 3
Rep Power: 13
Fishburn is on a distinguished road
I have a aproblem to set up the proper model for Fluid-solid Flow in pipe.
I want to simulate the fluid transport ability (density of fluid is less than solid partical), which i will vary flow rate and density to see the proper condition the clean up the solid partical in the pipe....

Please give me the guide line....Thanks in advance
Fishburn is offline   Reply With Quote

Old   May 11, 2012, 14:13
Default
  #2
New Member
 
Oat Mongkhol
Join Date: May 2012
Posts: 3
Rep Power: 13
Fishburn is on a distinguished road
My model will use volume fraction inlet as Fluid/solid = 80/20...
as the outlet side, when the velocity of the fluid is not sufficient, some of the solid partical should stay in the bottum of the pipe as stationary layer while some of the solid partical will dispered in the fluid phase.....any ideas....to help Thanks
Fishburn is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No results for solid domain Gary Holland CFX 10 March 13, 2009 04:30
gas solid pipe flow tahar Phoenics 6 November 3, 2003 13:03
Turbulence model for Transient Pipe Flow Modeling Brian FLUENT 0 June 7, 2002 13:15
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19
Turbulent non-Newtonian fluid flow using k-w model Athar Zaidi CFX 1 February 1, 2000 16:46


All times are GMT -4. The time now is 10:31.