CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Comparison: TecPlot vs. PARAview

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 4, 2005, 23:25
Default Comparison: TecPlot vs. PARAview
  #1
Michail
Guest
 
Posts: n/a
Dear colleagues

What can do one, and what can not do the other?

Comparison: TecPlot vs. PARAview

Any suggestions are highly appreciated.

Michail
  Reply With Quote

Old   December 5, 2005, 01:27
Default Re: Comparison: TecPlot vs. PARAview
  #2
dpshaka
Guest
 
Posts: n/a
PARAVIEW IS A FREE SOFTWARE

TECPLOT IS A COMERCIAL SOFTWARE

AND THE SUPORT OF THE PARAVIEW IS LITTLE.

THE DATA FORMAT IS EASY TO UNDERSTAND FOR THE TECPLOT.

TECPLOT IS EASY TO USE.

  Reply With Quote

Old   December 5, 2005, 05:45
Default Re: Comparison: TecPlot vs. PARAview
  #3
andy
Guest
 
Posts: n/a
As dpshaka says, tecplot is commercial software and paraview is freeish (ish because you need to spend about 150 euros on a couple of books to get the documentation).

We have recently looked at 3D plotters but commercial programs like fieldview and tecplot are not viable because of the cost (impoverished university requiring lots of copies on a range of platforms). The choice was effectively between paraview and visit and we opted to stick with the latter although we will support both eventually. They have different strengths and weaknesses but, extraordinarily, paraview does not seem to support multi block structured grids and we are not going to write such software for it without documentation. Anyone know of such a reader? There is no documentation available for paraview until "early 2006" whenever that may be.

Although the commercial software is still better for student use both these programs have evolved from poorish a few years ago to really quite usable today. This is encouraging for the future at least until support for one or both the projects gets axed which happened to paraview for a year or two.

Paraview has a bit more plotting capability but the better file type support (for our uses) and documentation of visit currently gives it the edge for our purposes.

  Reply With Quote

Old   December 5, 2005, 07:59
Default Re: Comparison: TecPlot vs. PARAview
  #4
Renato.
Guest
 
Posts: n/a
Well, you don't need to buy Paraview's books to start using it. I began to use Paraview only using a short description of the software and I thought the software so easy to work that any book was necessary to learn the main features.

Regarding the other questions:

- Version 2.4.x of Paraview supports multi-blocks structured and unstructured

- Support: I think that Paraview's mailing list is much more userful/helpful than any other kind of support. You just put your question and wait a few minutes to get your answer;

- File format: Paraview give you support for at least 30 file formats, including some famous formats such as: Ensight, Plot3D, HDF5, etc... . Ensight, for me, is the easiest file format I've ever faced with.

Another issue that must be considered is that Paraview has been frequently developed and most of the "desired" features were not implemented/tested yet. For example: the multi-block reader was just implemented in version 2.4.x.

regarding VISIT... I'm still trying to read my Ensight case files in it without any success yet. The same file that is read by Ensight and Paraview, VISIT is not able to read and I can't figure out why yet.

regarding Tecplot... I tried Tecplot some time ago but the first few minutes with a software are enough, for me, determine if this software is easy or hard (for me again) to use and I ended giving up. Tecplot realy seems to be powerful but I was not able to use it.

Regards

Renato.
  Reply With Quote

Old   December 5, 2005, 11:37
Default Re: Comparison: TecPlot vs. PARAview
  #5
andy
Guest
 
Posts: n/a
> Version 2.4.x of Paraview supports multi-blocks structured and unstructured

I have the vtk file format documentation for 4.2 and there is no support for multi-block. Do you have a pointer to documentation of this recently added capability?

  Reply With Quote

Old   December 5, 2005, 17:38
Default Re: Comparison: TecPlot vs. PARAview
  #6
Renato.
Guest
 
Posts: n/a
Hi Andy,

take a look in the following message (specially the first item) to see if it's what you're looking for.

http://public.kitware.com/pipermail/...er/002152.html

Regards

Renato.
  Reply With Quote

Old   December 5, 2005, 21:42
Default Re: Comparison: TecPlot vs. PARAview
  #7
Adrin Gharakhani
Guest
 
Posts: n/a
I have not used either paraview or visit ... How about plotting speed, especially for large unsteady data files? How is the support for parallel/distributed data?

Adrin Gharakhani
  Reply With Quote

Old   December 6, 2005, 04:49
Default Re: Comparison: TecPlot vs. PARAview
  #8
andy
Guest
 
Posts: n/a
Thanks for the link. I downloaded and installed the latest stable version, read the source code and it has only partial support for multi block grids.

They have added a new class to the guts of vtk which presumably handles multiblocks although I did not read it to find out what (no documentation and C++ inheritance makes browsing someone elses code structure very hard work). There was a note about missing functionality but I did not understand the vtk-speak to appreciate what it was.

Multiblock is in the Plot3D reader but the Plot3D reader is only partially implemented and it will only read velocity and 2 thermo properties and not other variables like acoustic, electric and magnetic fields, species, etc...

Multiblock has started being added to the native vtk file format but is incomplete with most of the functions being empty in the reader. There is an example of how to write some C++ code to get multiblock into vtk but how well supported the connectivity and handling of ghost cells is I do not know. The parameters I would expect to see were not in evidence.

I did not look at the ensight code but there is no specific reader for multiblock unlike the other two formats. However, ensights format may not need something extra it in order to define multiblocks.

I could have greped to see what uses the new class but I had pretty much established paraview still cannot do what we want and we are better off sticking with visit and waiting for parview to evolve a bit more.

Of course, this whole exercise (about an hour including download) demonstrates the wisdom of using open source in a research/teaching environment. We have answered the questions we needed and could have added the code if the need to use paraview was urgent. This could not have done this with tecplot, fieldview or similar. Although I should add that I received good support getting round bugs in fieldview when I used it for a while. Cannot comment on tecplot support.

  Reply With Quote

Old   November 16, 2012, 09:09
Default
  #9
New Member
 
Cheng Jie
Join Date: Nov 2011
Posts: 8
Rep Power: 14
jiec827 is on a distinguished road
Quote:
Originally Posted by Michail
;39146
Dear colleagues

What can do one, and what can not do the other?

Comparison: TecPlot vs. PARAview

Any suggestions are highly appreciated.

Michail
Excuse me! I am new here...
I want to know how to import Fluent cases and .dat into Paraview?
THX
jiec827 is offline   Reply With Quote

Old   July 25, 2013, 10:46
Default
  #10
Member
 
Arina
Join Date: Oct 2009
Location: Belarus
Posts: 71
Rep Power: 16
Akuji is on a distinguished road
Send a message via ICQ to Akuji
Hello!
Is it possible to open vtk in Tecplot?
If not, maybe you can suggest some converters form vtk to tecplot.
Akuji is offline   Reply With Quote

Old   January 16, 2018, 01:00
Default Tecplot can support VTK
  #11
New Member
 
Andhra Pradesh
Join Date: Aug 2014
Posts: 3
Rep Power: 11
manohar1487 is on a distinguished road
HI Akuj,
Tecplot can support VTK now.

New VTK loader that supports .pvtu, .vtu, and .vtm file formats provide compatibility with COMSOL, Envenio, SimVascular and PyFR.

Regards,
Manohar
manohar1487 is offline   Reply With Quote

Old   January 16, 2018, 01:01
Default
  #12
New Member
 
Andhra Pradesh
Join Date: Aug 2014
Posts: 3
Rep Power: 11
manohar1487 is on a distinguished road
HI Akuj,
Tecplot can support VTK now.

New VTK loader that supports .pvtu, .vtu, and .vtm file formats provide compatibility with COMSOL, Envenio, SimVascular and PyFR.

Regards,
Manohar
manohar1487 is offline   Reply With Quote

Old   August 18, 2022, 16:46
Default
  #13
Member
 
Brandon M
Join Date: Feb 2019
Posts: 38
Rep Power: 7
Brandon_CFD is on a distinguished road
Also, you can convert many of the VTK file formats to Tecplot format with the following Python script from the PyTecplot GitHub (also see the directory for other file converter scripts):
https://github.com/Tecplot/handyscri...e_converter.py
Brandon_CFD is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[General] Convert Tecplot DAT files to ParaView redable one B. R. Guirguis ParaView 7 September 8, 2023 07:38
ParaView and Tecplot 360 'has stopped working' on windows zhenglun.wei OpenFOAM 0 June 27, 2011 18:29
ParaView and Tecplot 360 'has stopped working' on windows zhenglun.wei Main CFD Forum 0 June 27, 2011 12:49
paraFoam reader for OpenFOAM 1.6 smart OpenFOAM Installation 13 November 16, 2009 22:41
TecPlot VS ParaView B. R. Guirguis Main CFD Forum 0 February 27, 2006 12:53


All times are GMT -4. The time now is 22:13.