|
[Sponsors] |
December 10, 2005, 19:27 |
CFD simulation of round turbulent jet
|
#1 |
Guest
Posts: n/a
|
Hello, I am new to CFD and I want to model a round turbulent jet issuing into a quieschent medium. I am wondering what type of turbulence model to use and what boundary conditions would be used. Thanx a lot for your help
|
|
December 12, 2005, 15:25 |
Re: CFD simulation of round turbulent jet
|
#2 |
Guest
Posts: n/a
|
What kind of simulation do you have in mind.? DNS LES or ASM
-Harish |
|
December 14, 2005, 23:59 |
Re: CFD simulation of round turbulent jet
|
#3 |
Guest
Posts: n/a
|
assuming use of RANS. use k-ep even for the free sheer region, modify the stress terms accordingly, dont modify the constants arbitrarily.
|
|
January 6, 2006, 04:22 |
Re: CFD simulation of round turbulent jet
|
#4 |
Guest
Posts: n/a
|
Hey What I personally feel and my thesis work was on Jet Impingment,I found recent Durbins V2F turbulence model (RANS) is extremely good and which gives extremly good results.In additon to u K and Eps equation u have two more V2 and f equations.
try to avoid to use K-Eps model for this problem cheers Alex |
|
June 18, 2013, 20:53 |
turbulent round jet
|
#5 |
New Member
Renan Margonar
Join Date: Jun 2013
Posts: 4
Rep Power: 13 |
Hello , I'm making the analysis of a turbulent round jet.The purpose of this case is to validate the performance of the Reynolds Stress Model for turbulence. It's an exercise of ANSYS Fluid Dynamics Verification Manual ANSYS. Anyone already made this analysis, or can help me?
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jet fan and Tunnel simulation | ahlo7 | CFX | 9 | November 13, 2019 04:54 |
Solar Radiation in OpenFOAM | plainstyle | OpenFOAM Running, Solving & CFD | 15 | July 8, 2014 04:43 |
turbulent Jet Simulation | binubtharayil | FLUENT | 2 | August 15, 2009 07:35 |
Turbulent Round Jet | Obnates | FLUENT | 8 | May 14, 2009 09:55 |
Round jet model in FLUENT | PurdueME | Main CFD Forum | 2 | April 8, 2009 16:41 |