pneumatic dryer simulation?

TurbulentFluid · December 11, 2009, 08:50

Hello!

I am supposed to conduct some pneumatic dryer simulations. So far it seems it will require eulerian/lagrangian approach for particle tracking, RANS should be a good first guess for fluid flow and kE for turbulence... however I have found literature in this area to be very scarce.. Does anyone have any experiences with this type of simulations?

Additionally, is it possible to model the drying of the particles (mass variation)? I have Fluent and CFX available.

Any help would be greatly appreciated!

Sujala · September 17, 2012, 07:58

I am also doing the same work (pneumatic drying of particles ). If you have found some good tutorials please share.

December 11, 2009, 08:50	pneumatic dryer simulation?	#1
TurbulentFluid New Member adrijana radosevic Join Date: Dec 2009 Posts: 7 Rep Power: 16	Hello! I am supposed to conduct some pneumatic dryer simulations. So far it seems it will require eulerian/lagrangian approach for particle tracking, RANS should be a good first guess for fluid flow and kE for turbulence... however I have found literature in this area to be very scarce.. Does anyone have any experiences with this type of simulations? Additionally, is it possible to model the drying of the particles (mass variation)? I have Fluent and CFX available. Any help would be greatly appreciated!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing mesh while running a simulation	akultane	CFX	1	November 15, 2009 13:46
FSI TWO-WAY SIMULATION	Smagmon	CFX	1	March 6, 2009 13:24
Continuous vs interrupted simulation	sega	OpenFOAM Running, Solving & CFD	4	November 3, 2008 14:29
Fire simulation using FDS from NIST	Jens	Main CFD Forum	1	January 22, 2004 01:53
3-D Contaminant Dispersal Simulation	Apple L S Chan	Main CFD Forum	1	December 23, 1998 10:06

September 17, 2012, 07:58		#2
Sujala New Member Sujala Bhattarai Join Date: Sep 2012 Posts: 2 Rep Power: 0	I am also doing the same work (pneumatic drying of particles ). If you have found some good tutorials please share.