CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Beginner questions - Compressibility or Rarefaction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 25, 2012, 12:37
Default Beginner questions - Compressibility or Rarefaction
  #1
New Member
 
Join Date: Oct 2012
Posts: 1
Rep Power: 0
Franz is on a distinguished road
Hello !

I try to model an isothermal laminar flow of a gaz (H₂) inside a long (5m) straight microchannel (square cross section 1mm²).

Boundaries :

Inlet : Flow rate
Outlet : Atmospheric pressure
It is for fuel cell application, so the gaz is consumed along the channel through the top of the domaine. (Is it called a source term ?)

My first problem is to understand if i need a compressible solver as the density of the gaz will change along the channel but the mach number is far from 1 (8E-3). I'm not sure even if i read that : http://www.cfd-online.com/Forums/mai...ible-flow.html

If yes, in the SIMPLE algorithm is it possible to update local densities (i.e on each control volume) with the ideal gas law (\rho=\frac{MP}{RT}) after the pressure and velocities correction ?

I don't think it's possible because it doesn't take into account the control volume itself like this expression \rho=\frac{m}{V}

What did I miss ?

Thank you for your comments.
Franz is offline   Reply With Quote

Reply

Tags
compressible, rarefaction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beginner questions - modelling lift and drag on a towed body ABF Main CFD Forum 15 October 20, 2014 00:27
SIMPLE Algorithm - Questions from a Beginner Emre Turkoz Main CFD Forum 8 August 13, 2010 01:21
[ICEM] beginner questions for ICEM CFD johnp ANSYS Meshing & Geometry 14 August 10, 2010 18:45
Couple of Beginner Questions hydromodeler OpenFOAM Installation 5 February 27, 2008 05:34
Questions from a beginner shuo OpenFOAM Running, Solving & CFD 1 September 11, 2006 08:58


All times are GMT -4. The time now is 09:25.