CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

local time stepping

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 28, 2006, 12:42
Default local time stepping
  #1
cfdbeginner
Guest
 
Posts: n/a
Hello,

I would like to ask something about local time stepping and I hope somebody can help me.

Would you say that this method is applied to a solver to increase stability - so a steady problem can be treated as "unsteady" with a time step which is dependent on the CFL number?

Thanks.
  Reply With Quote

Old   February 28, 2006, 16:03
Default Re: local time stepping
  #2
CFD_ACE
Guest
 
Posts: n/a
No. Local time stepping is used as a solution acceleration method - it can occasionally lead to robustness problems as the solution is no longer entirely 'physical', except in the limit t -> infinity (i.e. the 'steady' solution).
  Reply With Quote

Old   March 1, 2006, 01:04
Default Re: local time stepping
  #3
Aditya
Guest
 
Posts: n/a
you actually lose the temporal accuracy if you use the local time stepping. It is mainly used when we have a grid clustered on one side. So for large cells the CFL does not demand the small time step that a small cell would need. Hence local time stepping is used to accelarate the steady state convergence. It actually means that the different cells move in different time regimes if at all it makes any sense !!!. No physics here. A considerable lot of people are not comfortable with the local time stepping due to this aspect. You can use Dual time stepping to regain the temporal accuracy and use local time stepping for unsteady problems.

  Reply With Quote

Old   March 1, 2006, 03:06
Default Re: local time stepping
  #4
cfdbeginner
Guest
 
Posts: n/a
Sorry, but now I am completely mixed up.

Could you just try to give me another short explanation (or a free reference)?
  Reply With Quote

Old   March 3, 2006, 05:26
Default Re: local time stepping
  #5
Mohammad
Guest
 
Posts: n/a
Hello..

Whatever the informations which we are applying interms boundary conditions(Physics of the problem)... cant move more than one grid space per unit time. So we have to give optimum timestep sothat the information shouldnt jump more than one grid space per unit time...

This is the funda of CFL number... Next Local and Global timestep..

Local timestep:: In each cell the available information moves with local velocity.. so Local timestep= (Size of the cell/ Local speed)

Global timestep is calculated based on max speed of information otherwise min timestep required :: Global timestep= Min. all( size of cell/ corres.infor speed)

I hope it will help

Regards Mohammed

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 15 May 1, 2016 17:12
Dynamic moving mesh Pei-Ying Hsieh (Hsieh) OpenFOAM Running, Solving & CFD 64 June 7, 2012 11:04
Error while running rhoPisoFoam.. nileshjrane OpenFOAM Running, Solving & CFD 8 August 26, 2010 13:50
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
Info on local time stepping Frank Muldoon Main CFD Forum 1 October 9, 1998 08:44


All times are GMT -4. The time now is 09:56.