|
[Sponsors] |
July 13, 1999, 05:58 |
Best CFD software
|
#1 |
Guest
Posts: n/a
|
What is the best CFD software if money is no object?
|
|
July 13, 1999, 06:54 |
Re: Best CFD software
|
#2 |
Guest
Posts: n/a
|
up till now , almost NO best CFD software was born since it is 'export ' level and so the most important is to get a best CFD user .
|
|
July 13, 1999, 08:57 |
Re: Best CFD software
|
#3 |
Guest
Posts: n/a
|
(1). The best CFD software should at least produce the best solution. (2). The best solution should be reliable, accurate, and repeatable. This is the general requirement.
|
|
July 13, 1999, 09:35 |
Re: Best CFD software
|
#4 |
Guest
Posts: n/a
|
It's really a good question. Which program is the best depends on the CFD problem you want to look at. There is a number of good CFD programs available. They perform more or less efficiently depending on the case. Just go to their vendors, give them a benchmark project and see what comes out of the program. To me, a general question "which CFD software is the best" does not make much sense. regards DML
|
|
July 13, 1999, 13:42 |
Re: Best CFD software
|
#5 |
Guest
Posts: n/a
|
(1). You are right. There is a deep trouble about the image of CFD. (2).Something is definitely missing. (3). If there exists a best CFD software, then there must be a best CFD engineer behind it. (4). If a user is not interested in the best CFD engineer, I guess, he is not going to get the best CFD software.(5). It is a story similar to a golden goose. (6). The only thing people have in mond is the golden egg. Without the golden goose, the golden egg is nothing but a museum item.
|
|
August 2, 1999, 07:24 |
Re: Best CFD software
|
#6 |
Guest
Posts: n/a
|
One thing to look into is how user friendly the package is, Though if money is no object you will get a lot more advice and help than people like me in an academic institution.
with the packages i've heard about and used they're split into 3 sections 1-to build the geometry, 2-to model and specify conditions in a command file, 3-shows you what happens when you put 1 + 2 together. The main problam I've had is that writing the command file is very complicated and the example in the book aren't always helpful. I don't know if this is any help Eve |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD Salary | CFD | Main CFD Forum | 17 | January 3, 2017 17:09 |
CFD Software Recommendation | 1150GSA | Main CFD Forum | 3 | September 2, 2009 15:46 |
What is the optimal (economically and user friendly) CFD software for my application? | Rame | Main CFD Forum | 0 | August 10, 2009 05:30 |
ASME CFD Symposium - Call for Papers | Chris Kleijn | Main CFD Forum | 0 | September 25, 2001 10:17 |
ASME CFD Symposium | Chris Kleijn | Main CFD Forum | 0 | August 22, 2001 06:41 |