CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Main CFD Forum (
-   -   Moving Bed Reactor (

Ahmad Al-Zoubi March 21, 2006 16:10

Moving Bed Reactor
Hallo all

I want to simulate a moving bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air.

I want to determine the temperature distribution at steady state.

Any hint is welcome

Thanks a lot in advance.

Son March 21, 2006 16:45

Re: Moving Bed Reactor

All times are GMT -4. The time now is 19:49.