Moving Bed Reactor

March 21, 2006, 15:10

Hallo all

I want to simulate a moving bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air.

I want to determine the temperature distribution at steady state.

Any hint is welcome

Thanks a lot in advance.

March 21, 2006, 15:45

Father7

March 21, 2006, 15:10	Moving Bed Reactor	#1
Ahmad Al-Zoubi Guest Posts: n/a	Hallo all I want to simulate a moving bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air. I want to determine the temperature distribution at steady state. Any hint is welcome Thanks a lot in advance.

March 21, 2006, 15:45	Re: Moving Bed Reactor	#2
Son Guest Posts: n/a	Father7

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving bed reactor	A. Al-Zoubi	FLUENT	3	September 11, 2017 07:57
urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using)	balu@gold6	FLUENT	4	July 26, 2012 10:37
how to model heat transfer inside a slow moving bed?	bigfans	FLUENT	1	October 9, 2009 00:12
Fixed bed reactor.....you can help...I am sure!!	Amrrefay	FLUENT	0	June 6, 2009 06:58
Bubbling Fluidized Bed reactor burning biomass	Mattias	FLUENT	6	June 8, 2004 02:53