CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Finite element method - number of elements

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 11, 2006, 03:01
Default Finite element method - number of elements
  #1
poornima
Guest
 
Posts: n/a
Hello,

I am using 2 dimensional finite element method to determine the temperature on a cylindrical wall in which fluid expands from inlet to outlet.

My solution is dependent on the number of grids (6-20). I understand that the accuracy of the solution depends on the number of grids, of course after a certain number the accuracy will not change.

But when i change the grids by 2 or 3, the solution is absurd, % error is more than 1000 sometimes.

How can I make my solution less sensitive on the number of grids?

Regards Poornima
  Reply With Quote

Old   April 11, 2006, 13:19
Default Re: Finite element method - number of elements
  #2
Angen
Guest
 
Posts: n/a
Your solution should be grid independent. So either the number of grid is to low for your problem or you have a bug in your program.

Angen

  Reply With Quote

Old   April 12, 2006, 08:35
Default Re: Finite element method - number of elements
  #3
poornima
Guest
 
Posts: n/a
I agree that the solution should be grid independent. but i am able to find solution for 6X6 grid and 10x10 grid but not for 10X6 grid, what could be the problem in this case. i guess i need to do scaling so that the equations are not a strong functions of number of grids. but i am struggling with how to design the scaling factors. i need some help in this regard.

Poornima
  Reply With Quote

Old   April 12, 2006, 13:08
Default Re: Finite element method - number of elements
  #4
Anindya
Guest
 
Posts: n/a
Your Grid of 10x10 or 10x6 is really too small for any cfd problem, even in 2D. Please increase your grid to say 100x60 or 100x100 an then compare the solutions.
  Reply With Quote

Old   April 13, 2006, 09:25
Default Re: Finite element method - number of elements
  #5
Márcio
Guest
 
Posts: n/a
Despite the very coarse grids, it seems the problem is not on the grid dimensions, but on its shape. You only get acceptable results in square grids, right? Maybe you should check your mesh generation and element matrices calculation.

-Márcio
  Reply With Quote

Old   April 14, 2006, 02:42
Default Re: Finite element method - number of elements
  #6
poornima
Guest
 
Posts: n/a
The geometry in context is an annular cylinder and hence the shape of the grid is cylindrical. I am only trying to discetrize the equations and solve, why should changing the number of grids result in an absurd solution. Surprisingly the problem disappears when I change the dimensions i.e the thickness and the length. Is it that aspect ratio is playing a significant role in the solution. If so, please suggest me how to overcome this problem.
  Reply With Quote

Old   April 14, 2006, 08:23
Default Re: Finite element method - number of elements
  #7
poornima
Guest
 
Posts: n/a
I suspect that the problem is because of the coupling between deltar and deltaz. because i am able to get solution for 100*6, 6*100, but not for 100*10, I am able to get solution for 10*10, 6*6 , 6*10, but not for 10*6. The ratio of D/L is known as aspect ratio, can any one suggest how to take this into consideration inorder to obtain solution to the problem.

regards Poornima
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What is C.V. based finite element method C-H Kuo Main CFD Forum 4 September 19, 2022 15:06
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
finite element method harten Main CFD Forum 0 November 1, 2007 06:37
ICEM and CFX report different number of elements Chris Basciano CFX 0 July 20, 2007 18:24
Finite volumes vs. finite elements: applications Lionel S. Main CFD Forum 10 January 22, 2007 11:51


All times are GMT -4. The time now is 04:12.