NeedHuman Body CAD file

asal · January 21, 2013, 16:28

Hello.

I need a simple human body 3D CAD model to import to ICEM.
Is there any body here can give me a hand?
thanks.

cdegroot · January 21, 2013, 16:48

http://www.nlm.nih.gov/research/visi...ting_data.html

You'll have the segment the images though. There are no publicly available CAD models that I know of. I've used these for modelling the lung, where I have segmented them into an STL file.

asal · January 21, 2013, 20:53

Sorry, I cannot follow you?
I should built up the geometry by my self based on these data sheets?!

cdegroot · January 21, 2013, 21:02

These are images of slices from CT or MRI scans. There are programs out there to help you generate surface models from these. Maybe someone will share a CAD model with you but in my experience they are never available and you just have to go straight from the images.

venkateshaero · January 22, 2013, 09:37

just mail me venkiaero2004@gmail.com. i will send link for that

asal · January 22, 2013, 12:29

I send you the mail. please check it out.
thanks

venkateshaero · January 27, 2013, 05:04

Please clean the geometry and send back.

January 21, 2013, 16:28	NeedHuman Body CAD file	#1
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Hello. I need a simple human body 3D CAD model to import to ICEM. Is there any body here can give me a hand? thanks.

January 22, 2013, 09:37		#5
venkateshaero Member venki Join Date: May 2011 Posts: 84 Rep Power: 14	just mail me venkiaero2004@gmail.com. i will send link for that asal likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc	ofslcm	OpenFOAM Community Contributions	25	March 6, 2017 10:03
1.7.x Environment Variables on Linux 10.04	rasma	OpenFOAM Installation	9	July 30, 2010 04:43
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5	BlGene	OpenFOAM Meshing & Mesh Conversion	10	August 6, 2009 04:26
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 19:08
error while compiling the USER Sub routine	CFD user	CFX	3	November 25, 2002 15:16

January 21, 2013, 16:48		#2
cdegroot Senior Member Chris DeGroot Join Date: Nov 2011 Location: Canada Posts: 414 Rep Power: 17	http://www.nlm.nih.gov/research/visi...ting_data.html You'll have the segment the images though. There are no publicly available CAD models that I know of. I've used these for modelling the lung, where I have segmented them into an STL file.

January 21, 2013, 20:53		#3
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Sorry, I cannot follow you? I should built up the geometry by my self based on these data sheets?!

January 21, 2013, 21:02		#4
cdegroot Senior Member Chris DeGroot Join Date: Nov 2011 Location: Canada Posts: 414 Rep Power: 17	These are images of slices from CT or MRI scans. There are programs out there to help you generate surface models from these. Maybe someone will share a CAD model with you but in my experience they are never available and you just have to go straight from the images.

January 22, 2013, 12:29		#6
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	I send you the mail. please check it out. thanks

January 27, 2013, 05:04		#7
venkateshaero Member venki Join Date: May 2011 Posts: 84 Rep Power: 14	Please clean the geometry and send back.