|February 9, 2013, 06:35||
Comsol Multiphysics 4.3 - Heat loss in hydraulic hose
Join Date: Feb 2013
Posts: 1Rep Power: 0
I'm working on an project where it's in my interest to find the heat
loss to the surroundings, from the hydraulic fluid inside a hose. I have access to
Comsol Multiphysics 4.3 through work, but has only used it with mechanical simulations.
If someone could help me get started, I would be greateful Also if somone have made an simulation like this and have a .mph file, it would be very
informativ for me to view this file?!
I have attached an image of an simple straight forward hose that I want to simulate.
I will be grateful for any help you can provide.
|February 13, 2013, 07:20||
Join Date: Apr 2011
Posts: 36Rep Power: 7
what you are trying to do is what COMSOL calls Multiphysics coupling,
in other words you are trying to use a heat module and a flow module.
It's fairly straightforward.
I'll leave with a link to an example you can find on their website.
Hope this helps.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Enforce bounds error with heat loss boundary condition at solid walls||Chander||CFX||2||May 1, 2012 20:11|
|Writing a UDF for heat loss from a composite wall||mali28||Fluent UDF and Scheme Programming||7||January 15, 2012 10:27|
|veriable heatWallFlux / heat firstname.lastname@example.org||OpenFOAM||1||July 16, 2010 18:10|
|Heat loss through walls||franzdrs||FLUENT||6||March 29, 2010 12:11|
|Heat loss through walls||franzdrs||Main CFD Forum||2||September 30, 2009 06:33|