Bulk velocity

mcaro · August 17, 2011, 14:10

Hello,

i am trying to simulate a turbulent flow around a wall-mounted cube using the kappa-epsilon model and, in a future, the RNG- kappa-epsilon model.

The Reynolds number based on the bulk velocity and the channel height (Re=U_b* H/nu, U_b bulk velocity, H cube height and nu cinematic viscosity) is Re=40000.

But , excuse me for this question: How i compute the bulk velocity?

I am using to simulate this problem an in-house code for turbulent flows , for this i need the inflow velocity , Uo ,to start the simulation. The H value is done as the Re above mentioned.

The initial and boundary conditions are taken from Lakehal and Rodi,"Calculation of the flow past a surface-mounted cube with two-layer turbulence models", 1997.

regards
Miguel

mcaro · August 18, 2011, 10:02

Turbulent flows, S. Pope, "wall flows", p.p.264-280.

Rami · August 22, 2011, 06:23

$u_{i,bulk} = \int_{\partial V} \rho u_i dA / \int_{\partial V} \rho dA$

JR22 · March 19, 2013, 07:06

Does my question answer your question?

I asked (paraphrasing):

Quote:

The stressComponents postprocessing utility (utilities/postProcessing/stressField/stressComponents.C) provides a Ub vector (x,y,z) mapped on surfaces. What is the physical meaning of Ub?

I know this is a pretty old thread, but this might give it a happy ending.

August 17, 2011, 14:10	Bulk velocity	#1
mcaro New Member Miguel Caro Join Date: Apr 2010 Posts: 26 Rep Power: 15	Hello, i am trying to simulate a turbulent flow around a wall-mounted cube using the kappa-epsilon model and, in a future, the RNG- kappa-epsilon model. The Reynolds number based on the bulk velocity and the channel height (Re=U_b* H/nu, U_b bulk velocity, H cube height and nu cinematic viscosity) is Re=40000. But , excuse me for this question: How i compute the bulk velocity? I am using to simulate this problem an in-house code for turbulent flows , for this i need the inflow velocity , Uo ,to start the simulation. The H value is done as the Re above mentioned. The initial and boundary conditions are taken from Lakehal and Rodi,"Calculation of the flow past a surface-mounted cube with two-layer turbulence models", 1997. regards Miguel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help with UDF for contact angle based on contact line velocity	gandesk	Fluent UDF and Scheme Programming	14	October 29, 2012 13:58
Velocity in Porous medium : HELP! HELP! HELP!	Kali Sanjay	Phoenics	0	November 6, 2006 06:10
How to calculate Velocity?	Kali Sanjay	Phoenics	1	May 1, 2006 13:57
Neumann pressure BC and velocity field	Antech	Main CFD Forum	0	April 25, 2006 02:15
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11

August 18, 2011, 10:02		#2
mcaro New Member Miguel Caro Join Date: Apr 2010 Posts: 26 Rep Power: 15	Turbulent flows, S. Pope, "wall flows", p.p.264-280.

August 22, 2011, 06:23		#3
Rami Senior Member Rami Ben-Zvi Join Date: Mar 2009 Posts: 155 Rep Power: 17	$u_{i,bulk} = \int_{\partial V} \rho u_i dA / \int_{\partial V} \rho dA$