Error on coupling Star-CCM+ 6.04.014 to Ricardo Wave 8.0
 

UPDATING...

Hi guys,

I am trying to couple Star-CCM+ with Ricardo Wave for a intake manifold but when I click Start Wave and then Run Simulation, after some iterations Star stops and a cpupling error message appears, when I look into the .out file from Ricardo, I have mass fraction error... but on wave and ricardo all but air are as 0.0 for mass fractions.

I*** AXIAL CONDUCTION RELAXATION CRITERIA SATISFIED AFTER 1 OFFLINE CYCLES
ENG: 2 60 55353 30.35 0.967 1139.6 1.120 13.355 -0.045 13.42 0.2334 1.568 376.2 0.769E-01
ENG: 3 60 55585 30.62 0.975 1140.8 1.120 13.398 -0.073 13.46 0.2347 1.552 373.6 0.769E-01
ENG: 4 60 55818 31.30 0.997 1140.1 1.120 13.743 -0.051 13.81 0.2338 1.608 376.0 0.769E-01
ENG: 1 60 56053 30.64 0.976 1140.4 1.120 13.370 -0.082 13.43 0.2353 1.551 374.1 0.769E-01
ENG VOLEF(TOT) = 0.9785 PHI(1) = 1.120
I*** AXIAL CONDUCTION RELAXATION CRITERIA SATISFIED AFTER 1 OFFLINE CYCLES
F*** PROPTY: BAD MASS FRACTION SUM: 1.0716
TIME STEP = 56054 CALLED FROM EXT:CFD # 1 JUNCTION: 4
AIR = 1.000
VAP = 0.2200E-01
B_AIR = 0.4128E-03
B_FUEL = 0.3175E-04
FLIQ = 0.4920E-01
T = 300.0
P = 2.000
RHO = 1.244
H = -0.1066E+06
E = -0.8459E+05
R = 275.0
CP = 1011.
GAMMA = 1.358
CS = 337.3


Any help would be greatly appreciated!!