CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Main CFD Forum (https://www.cfd-online.com/Forums/main/)
-   -   number of nodes on an edge in ICEM CFD (https://www.cfd-online.com/Forums/main/11815-number-nodes-edge-icem-cfd.html)

strider July 13, 2006 12:26

number of nodes on an edge in ICEM CFD
 
I wonder if anyone have had this probem before :

I can't put more than 1000 nodes on an edge in «edge parameters». When I put 1001, the refined geometry disapears. At first, I thaught it was just a display problem and that the mesh existed without being displayed. But the exportation to CFX had the same problem, the part just disapeared. Now, is there a number of nodes limit somewhere that I could level up.

Thanks a lot!

Patrick July 14, 2006 01:24

Re: number of nodes on an edge in ICEM CFD
 
I had the same problem and there is no way to level up this number. You have to divide your geometry into several blocks. As far as I remember you should be able to set 1000 nodes per block-edge. Anyway: have you installed all SP1? It's possible that this bug is fixed in the meantime.

strider July 24, 2006 15:31

Re: number of nodes on an edge in ICEM CFD
 
Thank you Patrick, indeed I had to split the edge.



All times are GMT -4. The time now is 07:33.