CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

Boundary Condition in PISO

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 19, 1999, 20:59
Default Boundary Condition in PISO
Posts: n/a
Hello, I'm developing an incompressible flow code using 'PISO' algorithm but I cannot find appropriate boudary condition. Is there any special boundary condition for 'PISO' algorithm(Especially for pressure correction equation)? I implemented pressure correction equation to 2nd correction step, but in comparison with SIMPLE method, the 2nd correction was not effective so I see the 2nd correction step implementation has some problem with boundary condition. If you have any advice, thank you for your answer. Have a nice day.
  Reply With Quote

Old   August 20, 1999, 13:24
Default Re: Boundary Condition in PISO
N. Hannoun
Posts: n/a
Boundary conditions are not easy to implement with PISO. For the pressure Poisson equation you can get a boundary condition (Neumann type) by writing the normal component of the momentum equation on the boundary (using of course the chosen boundary conditions for velocity). Then you must introduce an additional relation which allows you to get rid of the unknown term involving the velocity corrections in this equation. You can set this term equal to zero or extrapolate it from the interior nodes.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 05:57
Can anyone give me some hint on how to make traction free boundary condition? poplar OpenFOAM 3 January 14, 2015 03:37
Boundary Conditions Thomas P. Abraham Main CFD Forum 20 July 7, 2013 05:05
Setting outlet Pressure boundary condition using CAFFA code Mukund Pondkule Main CFD Forum 0 March 16, 2011 04:23
How to set boundary condition in Fluent for the fo Peiyong FLUENT 1 November 10, 2006 12:44

All times are GMT -4. The time now is 20:55.