CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Porous fow with rotating wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 19, 1998, 10:03
Default Porous fow with rotating wall
  #1
Yi Wang
Guest
 
Posts: n/a
I am trying to simulate a porous flow problem. The domain is formed by two co-axial hollow cylinders. The outer one remains stationary and the inner one rotates at high speed (angular velocity is about 10,000 rpm). A porous medium is filled in between. Two-phase (air/oil) flow enters the domain from one end and leaves the domain via holes on the inner cylinder. The device is designed to complete the separation of oil from air.

As you can see, it involves calculations of flows in porous medium, flows with rotaing walls, two-phase flows and their separation. Therefore I would like to have advices on any of these subjects. Especially, I am concerning with which turbulence model is most suitable and if there are any suitable test cases available.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rotating wall inside of an MRF zone - fixedValue or movingWallvelocity? evrikon OpenFOAM Running, Solving & CFD 3 April 30, 2015 04:51
How to set rotating wall as boundary condition babu FLUENT 7 December 14, 2013 05:48
Rotating wall karthik OpenFOAM Pre-Processing 5 May 26, 2010 11:54
Porous wall boundary condition in LES Henrik FLUENT 0 May 31, 2007 07:17
Wall functions Abhijit Tilak Main CFD Forum 6 February 5, 1999 02:16


All times are GMT -4. The time now is 10:54.