CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Main CFD Forum (https://www.cfd-online.com/Forums/main/)
-   -   Free or Open Post-processor (https://www.cfd-online.com/Forums/main/12068-free-open-post-processor.html)

hurricane August 24, 2006 05:59
Free or Open Post-processor
 
Hi Everybody,

I'm looking for an "Open Source" or Free post-processor like Tecplot. Of course it must be for CFD processor result display :)

So if you have any suggestion...

Thanx in advance

Renato. August 24, 2006 06:42
Re: Free or Open Post-processor
 
paraview - http://www.paraview.org

Renato.

p.s.: Tecplot is not free.

hurricane August 24, 2006 06:49
Re: Free or Open Post-processor
 
I know, and that's the reason why I'm looking for something else :) Thank you very much. I'm going to take a look.

bob August 24, 2006 06:50
Re: Free or Open Post-processor
 
http://www.llnl.gov/visit/

jojo August 24, 2006 08:15
Re: Free or Open Post-processor
 
Also, Mayavi or OpenDX.

Charles August 25, 2006 01:12
Re: Free or Open Post-processor (Visit in Windows)
 
OK, Visit looks really interesting, and the Linux version works fine. However, the Windows version stops at 12%, as mentioned in the FAQ. However, I've tried the fixes suggested in the FAQ (start-up directory, launch from command line, turn off the firewall) and I still can't get it to start. Any suggestions?


All times are GMT -4. The time now is 15:36.