CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

Staggered grid outflow boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 4, 2013, 06:43
Post Staggered grid outflow boundary condition
New Member
Avinash T. Shinde
Join Date: Jul 2012
Posts: 10
Rep Power: 12
avinash87 is on a distinguished road
I am facing a problem in the implementation of the outflow boundary condition on staggered grid. Pressure grid nodes (0 to n) and velocity (0 to n+1).
No pressure nodes on the boundaries to avoid complications of half CV length involvement, from the advection point of view it should not affect and it does not by forcing the reflective boundary condition u[n+1]=0. it works fine.
But with the implementation of outflow boundary condition p[n]=p[n-1] and u[n+1]=u[n], m not getting the correct results. Implementation has been done far away from the source ensuring a developed velocity profile.
so please help.
avinash87 is offline   Reply With Quote


outflow boundary, staggered grid

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX fails to calculate a diffuser pipe flow shenying0710 CFX 7 March 26, 2013 05:13
Outflow boundary condition for convecction-difussion problem. juanelo14 Main CFD Forum 0 September 27, 2012 01:20
OUTFLOW boundary condition for scalars lalupp Main CFD Forum 0 November 13, 2010 05:43
setting boundary condition for curvlinear grid taw Main CFD Forum 2 February 5, 2010 18:23
Multiblock grid, interface Boundary condition Nandu CFX 2 August 6, 2002 06:07

All times are GMT -4. The time now is 16:46.