|
[Sponsors] |
A role of combustion modeling in flow solver? |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
Hello.
I'm studying combustion modeling. I have some problems about the flow solver. I don't know how the combustion model operates in CFD CODE. If you have some sample code, it can be useful to understand the role of combustion model in flow solver. Or, please recommend me the reference book with computer programs. I have three books about combustion modeling that doesn't include the computer programs. So, I have much difficulties for applying to my research area. 1. Veynante and Poinsot, "Theoretical and Combustion Model" 2. Peter, "Turbulence Combustion" 3. Oran and Boris, "Numerical Simulation of Reactive Flow" |
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weller combustion model - engineFoam solver. | ghindi | OpenFOAM Running, Solving & CFD | 1 | May 6, 2016 05:56 |
compressible flow calculation error using rhoSimpleFoam solver | student4326 | OpenFOAM Running, Solving & CFD | 7 | November 2, 2015 11:34 |
ATTENTION! Reliability problems in CFX 5.7 | Joseph | CFX | 14 | April 20, 2010 15:45 |
Problems modeling subsonic engine air inlet with flow separation | TWaung | CFX | 2 | March 29, 2009 18:42 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |