Lattice Boltzmann method for multiphase flow?

manxu · December 3, 2013, 04:43

Hello,

I have been trying to simulate the motion of a water droplet on an oil surface through VOF in Fluent. But the complexities in modelling the dynamic contact angle (between oil-water-oil) reached a point beyond which I lost trust in VOF method.

I came to know that Lattice Boltzmann can be used for moving contact line on solid-liquid-gas. But, I would like to know if Lattice Boltzmann method will also be able to capture the dynamic contact angle between oil-water-air ! ie., can LBM method take care of the moving contact line(oil-water-air) problem ?

Experts in LBM please help me out. Also, are there any other means of solving the dynamic contact angle between oil-water-air ?

My original case is a water droplet moving over an oil surface (the water droplet does not touch the solid surface). The movement of water droplet is brought out by a body force in x-direction.

Thanks.

flotus1 · December 3, 2013, 06:26

There exist some LBM models for this purpose.
See for example these two publications:

Yan, Zu: A lattice Boltzmann method for incompressible two-phase flows on partial wetting surface with large density ratio. Journal of Computational Physics 227 (2007) 763–775

Yoshino, Mizutani: Lattice Boltzmann simulation of liquid–gas flows through solid bodies in a square duct. Mathematics and Computers in Simulation 72 (2006) 264–269

manxu · December 3, 2013, 06:32

Quote:

Originally Posted by flotus1

There exist some LBM models for this purpose.
See for example these two publications:

Yan, Zu: A lattice Boltzmann method for incompressible two-phase flows on partial wetting surface with large density ratio. Journal of Computational Physics 227 (2007) 763–775

Yoshino, Mizutani: Lattice Boltzmann simulation of liquid–gas flows through solid bodies in a square duct. Mathematics and Computers in Simulation 72 (2006) 264–269

Hi Alex,

These two papers relate to dynamic contact angle in liquid-gas-solid medium. But I want to figure out the dynamic contact angle in liquid-liquid-gas medium. Are these still applicable for a case like oil-water-air contact line in a water droplet moving over oil ?

flotus1 · December 3, 2013, 06:48

I did not investigate if these models can be applied when 2 liquid phases are involved, but I would be surprised if there were no extensions for this kind of flow.

Simbelmynë · December 4, 2013, 13:56

You could check out www.palabos.org
The gallery showcase some nice multiphase examples. I am not sure it it is better than Fluent, but you will at least have much more flexibility in incorporating your own physics into the model.

Also to me it seems that multiphase flows that are unsteady (i.e. most VOF simulations) could fit quite well to the explicit approach of the LBM.

December 3, 2013, 04:43	Lattice Boltzmann method for multiphase flow?	#1
manxu New Member Rams Manu Join Date: Oct 2013 Posts: 21 Rep Power: 12	Hello, I have been trying to simulate the motion of a water droplet on an oil surface through VOF in Fluent. But the complexities in modelling the dynamic contact angle (between oil-water-oil) reached a point beyond which I lost trust in VOF method. I came to know that Lattice Boltzmann can be used for moving contact line on solid-liquid-gas. But, I would like to know if Lattice Boltzmann method will also be able to capture the dynamic contact angle between oil-water-air ! ie., can LBM method take care of the moving contact line(oil-water-air) problem ? Experts in LBM please help me out. Also, are there any other means of solving the dynamic contact angle between oil-water-air ? My original case is a water droplet moving over an oil surface (the water droplet does not touch the solid surface). The movement of water droplet is brought out by a body force in x-direction. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slip flow Boundary condition Lattice Boltzmann Method	PPPO	Main CFD Forum	0	May 21, 2013 02:50
Flow meter Design	CD adapco Group Marketing	Siemens	3	June 21, 2011 08:33
Periodic BC's for Thermal Lattice Boltzmann Method	anuhar	Main CFD Forum	0	May 4, 2009 03:45
lattice boltzmann method	yangqing	Main CFD Forum	4	August 22, 2002 10:15
Multiphase Flow with Chorin's Projection Method	Stefan Leschka	Main CFD Forum	2	August 20, 2002 15:46

December 3, 2013, 06:26		#2
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,399 Rep Power: 46	There exist some LBM models for this purpose. See for example these two publications: Yan, Zu: A lattice Boltzmann method for incompressible two-phase flows on partial wetting surface with large density ratio. Journal of Computational Physics 227 (2007) 763–775 Yoshino, Mizutani: Lattice Boltzmann simulation of liquid–gas flows through solid bodies in a square duct. Mathematics and Computers in Simulation 72 (2006) 264–269

December 3, 2013, 06:48		#4
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,399 Rep Power: 46	I did not investigate if these models can be applied when 2 liquid phases are involved, but I would be surprised if there were no extensions for this kind of flow.

December 4, 2013, 13:56		#5
Simbelmynë Senior Member Join Date: May 2012 Posts: 546 Rep Power: 15	You could check out www.palabos.org The gallery showcase some nice multiphase examples. I am not sure it it is better than Fluent, but you will at least have much more flexibility in incorporating your own physics into the model. Also to me it seems that multiphase flows that are unsteady (i.e. most VOF simulations) could fit quite well to the explicit approach of the LBM.