CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Aspect ratio near boundary for moderate Re

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 5, 2007, 04:57
Default Aspect ratio near boundary for moderate Re
  #1
quarkz
Guest
 
Posts: n/a
I am simulating airfoil flows at moderate Re of 10,000. I am using structured grids.

Using the flat plate estimation, the boundary layer is around 5/sqrt(10,000) = 0.05. Assuming 30 cells, the cell thickness near the boundary should be around 0.05/30 ~ 1.6e-3.

I wonder what is the acceptable range of aspect ratio near the boundary? If my 1st cell distance is 1.e-3, is that acceptable?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
High aspect ratio oort OpenFOAM 5 September 16, 2011 15:06
Maximum Aspect Ratio pz1337 FLUENT 0 April 6, 2011 05:45
[ICEM] Mesh along axis for a wedge gives elements with extreme aspect ratio sangrampp ANSYS Meshing & Geometry 0 November 17, 2010 07:57
does aspect ratio affect analysis mahesh Main CFD Forum 2 October 10, 2005 10:12


All times are GMT -4. The time now is 01:25.